Dino 135T Manual

The Dino 135T is a high-performance industrial-grade dinosaur robot with advanced motion capabilities, built-in AI processing, integrated sensor array, multiple input/output ports, wireless connectivity, modular expansion slots, remote control system, safety protocols (default access code 1350), power management system, and performance adjustments. Powered by 240V AC, 50Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Titanium alloy frame with integrated AI processor, Remote Control Unit, Sensor array connectors, Expansion ports, Charging dock, Data transfer jacks.

Feature	Description
Sensor array	For environmental detection and obstacle avoidance
Expansion port A	For additional module connections
Expansion port B	For specialized tool attachments
Data transfer jack	For firmware updates and data export
AC power connector	For charging station connection
I/O jacks	Multiple input/output connections
POWER ON/OFF	Activates/deactivates main power
AUTO/CALIBRATE	Auto-adjusts motion parameters; calibrates sensors
EMERGENCY STOP	Immediate system shutdown
MODE SELECT	Switches between operational modes

Installation

Unpack and inspect all components. Place on level surface.

1. Connect charging station: Position dock in clear area, attach power cable.
2. Install sensors: Mount external sensors as per layout diagram.
3. Connect expansion modules: Use designated ports for additional features.
4. Connect to power source.

WARNING! Unit is heavy; use proper lifting equipment. Ensure all connections are secure before powering on.

First-Time Setup

Power on unit; follow initialization sequence.

1. Calibrate sensors: Press CALIBRATE to run automatic sensor alignment.
2. Set language: In SYSTEM menu, select preferred language (default ENGLISH).
3. Configure motion parameters: Use CONTROL menu for speed, agility, etc.
4. For AI modes: Press SETUP in AI mode to configure learning parameters.

CAUTION! Ensure clear operational area; maintain safety perimeter during setup.

Specifications

• Frame Size: 135 cm height.
• Operating System: DinoOS v3.5.
• Motion Control: Adjustable via PERFORMANCE profiles (STANDARD, AGILE, POWER, PRECISION).
• Terminals: Sensor array, Expansion ports, Data transfer, Charging dock, I/O connections.
• AI processor: Supports autonomous operation, learning modes, pattern recognition.
• Supported functions: Navigation, object manipulation, data collection.
• Power Source: 240V AC, 50Hz with battery backup.
• Operating Temp: -10°C to 45°C.

Controls and Settings

Access control panel via MAIN MENU or SETUP (AI modes). Front Panel: POWER, EMERGENCY STOP, AUTO/CALIBRATE, MODE SELECT.

Remote: POWER, Function buttons, MODE SELECT, NAVIGATION, SPEED, EMERGENCY, RECALL, MAIN MENU, SETUP (AI mode).

Motion: SPEED, AGILITY, POWER, PRECISION, balance, movement patterns. Performance: OPERATIONAL MODES (STANDARD, AGILE, POWER, PRECISION). System: Language (ENGLISH default), sensor calibration, network settings. AI: Learning parameters (Basic, Advanced, Expert), safety protocols, access code (1350).

Connecting Devices

Sensors: Array connectors. Expansion: Ports A/B for modules. Data: Transfer jack for updates.

1. Turn off main power before connecting devices.
2. Match connectors to appropriate ports.
3. Select function via MODE SELECT (STANDARD, AGILE, POWER, PRECISION).

Tip: Ensure unit is powered down and disconnected before making connections.

Operating Modes

Supports autonomous, manual, and hybrid operation.

1. Activate mode: Press MODE SELECT, choose operational profile.
2. Manual control: Use navigation controls; adjust parameters with function buttons.
3. Stop: Press EMERGENCY STOP (immediate shutdown); restart with POWER.
4. Navigation: Use directional controls for movement.
5. Autonomous: Press AUTO for self-guided operation.
6. Precision: Use FINE CONTROL for detailed movements.
7. Data collection: Activate SENSOR MODE for environmental scanning.
8. Memory functions: Retains operational parameters between sessions.

WARNING! Do not override safety protocols. Maintain clear operational zone.

Safety Features

Emergency Stop: Immediate system shutdown. Safety Protocols: Configure in SECURITY menu (access code 1350). Obstacle Detection: Automatic avoidance system.

Maintenance & Cleaning

Power down completely before maintenance. Use approved cleaning materials only; no abrasive cleaners.

CAUTION! Do not use liquids on electronic components; follow scheduled maintenance intervals.

Regulatory Information

Industrial Robotics Standard: Class III autonomous system; complies with safety regulations for industrial use. Copyright © 2025 Dino Robotics; trademarks of Dino Technologies, Inc. Safety Systems: Incorporates multiple redundant safety protocols. For support, visit www.dinorobotics.com or contact 1-800-DINO-TECH.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Remote not responding	Signal interference/batteries	Clear line of sight; point at receiver; replace batteries.
No movement	Power/safety lock	Check power connection; verify safety protocols disabled.
Unstable operation	Calibration	Run calibration sequence; check surface stability.
Sensors not detecting	Alignment/obstructions	Clean sensor surfaces; run alignment procedure.
Mode not activating	System lock/parameters	Check system status; verify parameter settings.

Reset: Menu > System > Factory Reset if required.

Service: 1-800-DINO-TECH; www.dinorobotics.com