Dino DBS 101 Bluetooth Speakers Manual

The Dino DBS 101 is a portable Bluetooth speaker system with wireless connectivity, built-in rechargeable battery, AUX input for wired connections, TF card slot for local media playback, built-in microphone for hands-free calling, LED indicators, and intuitive controls. Features include stereo sound, bass enhancement technology, and compatibility with various audio formats. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing Media 8. Bluetooth Pairing 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Bluetooth speaker unit, Micro-USB charging cable, AUX cable, User manual.

FeatureDescription
Bluetooth ConnectivityWireless audio streaming from compatible devices
Built-in Rechargeable BatteryUp to 8 hours playback time
AUX Input3.5mm jack for wired audio connection
TF Card SlotSupports micro SD cards for local media playback
Built-in MicrophoneHands-free calling capability
LED IndicatorsPower, Bluetooth pairing, battery status
Power ButtonTurns speaker on/off
Volume ControlsAdjust audio output level
Play/PauseControls media playback
Mode ButtonSwitches between Bluetooth, AUX, and TF card modes

Installation

Unpack and inspect contents. Place on stable, flat surface.

  1. Charge the speaker: Connect Micro-USB cable to speaker and power adapter.
  2. Position speaker: Place in desired location, ensure ventilation openings are unobstructed.
  3. Connect optional accessories: Attach AUX cable for wired connection if needed.
  4. Insert TF card: Load media files onto micro SD card and insert into slot.

WARNING! Keep away from water and moisture. Do not expose to extreme temperatures.

First-Time Setup

Power on speaker; follow pairing procedure for Bluetooth devices.

  1. Charge fully: Ensure battery is charged before first use.
  2. Power on: Press and hold POWER button until LED indicator lights.
  3. Bluetooth pairing: Enter pairing mode (LED flashes blue); select "Dino DBS 101" on your device.
  4. Volume adjustment: Set appropriate volume level using volume buttons.
  5. Mode selection: Use MODE button to switch between input sources.

CAUTION! Use only provided or recommended charging accessories.

Specifications

Controls and Settings

Access functions via physical buttons on speaker unit.

Front Panel Controls: POWER, VOLUME UP/DOWN, PLAY/PAUSE, MODE, PHONE

Power: Press to turn on/off; hold for Bluetooth pairing. Volume: Adjust audio level. Play/Pause: Control media playback; answer/end calls. Mode: Cycle through Bluetooth, AUX, TF card inputs. Phone: Activate voice assistant; handle incoming calls.

LED Indicators: Solid blue (power on), Flashing blue (pairing mode), Red (charging), Green (fully charged).

Connecting Devices

Multiple connection options: Bluetooth wireless, AUX wired, TF card local playback.

  1. Bluetooth: Enable pairing mode; connect from device Bluetooth settings.
  2. AUX Input: Connect 3.5mm audio cable from source device to speaker.
  3. TF Card: Insert micro SD card with supported audio files.
  4. Select appropriate mode using MODE button after connection.

Tip: Ensure speaker is charged and within Bluetooth range for optimal performance.

Playing Media

Supports audio playback from Bluetooth devices, AUX input, and TF cards.

  1. Power on speaker and select desired input mode.
  2. Bluetooth: Play audio from connected device; use device controls.
  3. AUX: Play audio from connected source; use source device controls.
  4. TF Card: Audio files play automatically in sequence.
  5. Control playback: PLAY/PAUSE to start/stop, VOLUME to adjust level.
  6. Track navigation: Previous/next track functions available in some modes.
  7. Hands-free calling: Answer calls with PLAY/PAUSE button when connected via Bluetooth.

WARNING! Do not expose to liquids; keep charging port dry.

Bluetooth Pairing

Wireless connection to smartphones, tablets, computers, and other Bluetooth devices.

  1. Ensure speaker is powered on and in standby mode.
  2. Press and hold MODE button until LED flashes blue (pairing mode).
  3. On your device, enable Bluetooth and search for available devices.
  4. Select "Dino DBS 101" from discovered devices list.
  5. Connection confirmed when LED turns solid blue and you hear connection tone.
  6. For subsequent uses, speaker will automatically reconnect to last paired device.

To pair with new device: Enter pairing mode while disconnected from current device.

Care & Cleaning

Power off and disconnect from charging before cleaning. Use soft, dry cloth only; avoid liquids and abrasive cleaners.

CAUTION! Do not immerse in water; avoid extreme temperatures and direct sunlight.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Bluetooth qualification: Meets Bluetooth SIG standards. Copyright © 2025 Dino Audio; all rights reserved. For support, visit www.dinoaudio.com or contact customer service at 1-800-DINO-AUDIO.

Troubleshooting

SymptomPossible CauseCorrective Action
Speaker won't power onBattery depletedCharge speaker for at least 30 minutes; ensure proper connection.
Bluetooth connection failsRange/obstaclesMove devices closer; remove obstacles; reset pairing.
No sound from AUX inputCable/volumeCheck cable connection; ensure source volume is up; select AUX mode.
TF card not recognizedFormat/compatibilityEnsure card is formatted correctly; supported audio files; proper insertion.
Poor audio qualityConnection/batteryCheck Bluetooth signal; charge battery; ensure audio source quality.
Short battery lifeUsage/ageReduce volume; fully charge battery; battery may need replacement if aged.

Reset: Power off and hold POWER + MODE for 10 seconds to reset Bluetooth connections.

Service: 1-800-DINO-AUDIO; www.dinoaudio.com

Dino DBS 101 Bluetooth Speakers Manual © - All Rights Reserved 2025