Dino DBS Bluetooth User Manual

The Dino DBS Bluetooth is a versatile wireless speaker system with advanced Bluetooth connectivity, built-in microphone for hands-free calling, rechargeable battery, multiple audio input options, EQ sound profiles, LED indicators, and intuitive controls. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Bluetooth Pairing 8. Voice Assistant Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Bluetooth speaker unit, Micro-USB charging cable, AUX audio cable, User manual, LED status indicators, Control buttons.

Feature	Description
Bluetooth Connectivity	Wireless audio streaming up to 33 feet range
Built-in Microphone	For hands-free calling and voice commands
Rechargeable Battery	Up to 12 hours playback time
AUX Input	3.5mm audio jack for wired connections
EQ Sound Profiles	Multiple audio modes (Bass Boost, Vocal, Flat)
LED Indicators	Power, Bluetooth pairing, battery status
Power Button	Turns device on/off
Volume Controls	Adjust audio output level
Play/Pause	Controls media playback
Call Button	Answer/end calls and activate voice assistant

Installation

Unpack and inspect contents. Place on stable, dry surface.

Charge the device: Connect Micro-USB cable to power source until fully charged.
Position speaker: Place on flat surface away from edges and moisture.
Check connections: Ensure all cables are properly connected if using wired mode.
Power on: Press and hold power button until LED lights up.

WARNING! Keep away from water and extreme temperatures. Do not disassemble the unit.

First-Time Setup

Power on device; follow pairing procedure.

Enable pairing mode: Press and hold Bluetooth button until LED flashes blue.
Connect to device: Search for "Dino DBS" in your device's Bluetooth settings.
Confirm connection: LED will turn solid blue when successfully paired.
Adjust settings: Use EQ button to cycle through sound profiles.

CAUTION! Ensure device is fully charged before first use for optimal performance.

Specifications

Bluetooth Version: 5.0 with A2DP support
Battery Life: Up to 12 hours (varies by volume and usage)
Charging Time: 3-4 hours for full charge
Wireless Range: Up to 33 feet (10 meters)
Audio Inputs: Bluetooth, 3.5mm AUX
Frequency Response: 80Hz - 20kHz
Output Power: 10W RMS
Charging Port: Micro-USB
Weight: 1.2 lbs (0.54 kg)
Operating Temp: 32°F to 104°F (0°C to 40°C)

Controls and Settings

Access functions via physical buttons on the unit.

Button Functions: Power (on/off), Volume Up/Down, Play/Pause, Bluetooth Pairing, EQ Mode, Call/Voice Assistant.

Sound Profiles: Bass Boost (enhanced low frequencies), Vocal (clear mid-range), Flat (neutral response). LED Indicators: Blue (power on), Flashing Blue (pairing mode), Red (charging), Green (fully charged), Flashing Red (low battery).

Connecting Devices

Bluetooth: Wireless connection. AUX: 3.5mm audio cable connection.

Turn on speaker and enable Bluetooth on your source device.
Select "Dino DBS" from available devices list.
For wired connection: Plug AUX cable into speaker and source device.
Switch input mode if necessary using mode button.

Tip: Keep Bluetooth devices within 33 feet for optimal connection quality.

Bluetooth Pairing

Supports connection with smartphones, tablets, computers, and other Bluetooth devices.

Enter pairing mode: Press and hold Bluetooth button until LED flashes blue.
Search on device: Go to Bluetooth settings and select "Dino DBS".
Confirm pairing: Accept connection request if prompted.
Auto-reconnect: Device will automatically reconnect to last paired device when powered on.
Multiple devices: Can store up to 8 paired devices in memory.
Clear pairing: Hold Bluetooth button for 10 seconds to clear all paired devices.

WARNING! Do not attempt to pair while charging if experiencing connectivity issues.

Voice Assistant Features

Hands-free calling: Built-in microphone for clear voice transmission. Voice Assistant: Press and hold call button to activate Siri, Google Assistant, or other voice assistants.

Care & Cleaning

Turn off and unplug before cleaning. Use soft, dry cloth only; no liquids or chemical cleaners.

CAUTION! Do not immerse in water; avoid extreme temperatures and direct sunlight.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Bluetooth SIG qualified device. Copyright © 2025 Dino Audio Systems; all rights reserved. For support, visit www.dinoaudio.com or contact 1-800-DINO-AUDIO.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Battery depleted	Charge device for 3-4 hours; check power source.
Bluetooth not connecting	Pairing mode/range	Enter pairing mode; ensure device within 33 feet; clear paired devices.
Poor sound quality	Connection/obstacles	Reduce distance; remove obstacles; check EQ settings.
No audio from AUX	Cable/volume	Check cable connection; ensure volume turned up on both devices.
Short battery life	Age/usage	Reduce volume; disable extra features; battery may need replacement if old.

Reset: Hold power and Bluetooth buttons for 10 seconds to factory reset.

Service: 1-800-DINO-AUDIO; www.dinoaudio.com