Dino DBS101-BLK Bluetooth User Manual

The Dino DBS101-BLK is a compact Bluetooth speaker with wireless connectivity, built-in rechargeable battery, hands-free calling capability, AUX input, LED indicators, volume controls, power on/off, pairing mode, and micro-USB charging. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Bluetooth speaker unit, Micro-USB charging cable, AUX cable, User manual.

Package Contents

Unpack and verify all items are present.

1. Dino DBS101-BLK Bluetooth Speaker
2. Micro-USB charging cable
3. 3.5mm AUX audio cable
4. User manual
5. Warranty card

WARNING! Keep packaging materials away from children to prevent choking hazards.

First-Time Setup

Prepare speaker for initial use.

1. Charge the speaker: Connect Micro-USB cable to speaker and power source.
2. Power on: Press and hold POWER button until LED indicator lights.
3. Pair with device: Press PAIRING button to enter pairing mode.
4. Connect via Bluetooth: Select "Dino DBS101-BLK" from your device's Bluetooth list.
5. For wired connection: Use AUX cable to connect audio source.

CAUTION! Use only provided or certified charging cables to avoid damage.

Specifications

• Bluetooth Version: 5.0
• Wireless Range: Up to 10 meters (33 feet)
• Battery Capacity: 1200mAh lithium-ion
• Playback Time: Up to 8 hours (varies by volume level)
• Charging Time: 2-3 hours
• Inputs: Bluetooth, 3.5mm AUX
• Output Power: 5W RMS
• Frequency Response: 100Hz - 20kHz
• Dimensions: 150mm x 60mm x 40mm
• Weight: 280g

Controls and Indicators

Front panel controls and LED indicator meanings.

Buttons: POWER (on/off), VOLUME +/-, PAIRING, CALL (answer/end).

LED Indicators: Solid blue (power on), Flashing blue (pairing mode), Solid red (charging), Off (fully charged/low battery), Flashing red (low battery warning).

Bluetooth Pairing

Connect to Bluetooth devices wirelessly.

1. Ensure speaker is powered on and in pairing mode (flashing blue LED).
2. Enable Bluetooth on your smartphone, tablet, or computer.
3. Select "Dino DBS101-BLK" from available devices list.
4. Accept pairing request if prompted.
5. Connection confirmed when LED turns solid blue.

Tip: Speaker remembers last paired device for automatic reconnection.

Audio Playback

Playing music and audio content.

1. Play/pause: Use controls on your connected device.
2. Volume adjustment: Press VOLUME +/- buttons on speaker.
3. Track control: Use previous/next controls on your device.
4. Wired audio: Connect AUX cable for non-Bluetooth devices.
5. Battery monitoring: Red flashing LED indicates low battery.

WARNING! Avoid maximum volume for extended periods to prevent hearing damage.

Hands-Free Calling

Using the built-in microphone for phone calls.

1. Incoming call: Speaker will ring, press CALL button to answer.
2. During call: Use VOLUME buttons to adjust call volume.
3. End call: Press CALL button again.
4. Reject call: Press and hold CALL button when ringing.
5. Redial: Double-press CALL button to call last number.

Note: Ensure speaker is within 1 meter for clear microphone reception.

Care & Maintenance

Proper care for optimal performance and longevity.

Cleaning: Use dry, soft cloth only. Do not use liquids or chemicals.

Storage: Keep in dry place away from extreme temperatures.

Battery: Charge fully before first use; avoid complete discharge.

CAUTION! Do not expose to water or moisture; not waterproof.

Regulatory Information

FCC Compliance: This device complies with Part 15 of FCC rules. Operation subject to conditions: (1) device may not cause harmful interference, (2) device must accept any interference received. Bluetooth® word mark and logos are registered trademarks. Copyright © 2025 Dino Audio; all rights reserved. For support, visit www.dinoaudio.com or contact 1-800-DINO-AUDIO.

Troubleshooting

Reset: Hold POWER + PAIRING buttons for 10 seconds to factory reset.

Service: 1-800-DINO-AUDIO; www.dinoaudio.com/support