Dino Lite Pro User Manual

The Dino Lite Pro is a high-performance digital microscope featuring advanced magnification capabilities, LED illumination, USB connectivity, measurement software, image capture, and video recording. With ergonomic design and user-friendly interface, it's ideal for industrial inspection, research, education, and quality control applications. Below are key sections for setup, operation, features, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Configuration 4. Specifications 5. Controls and Functions 6. Software Installation 7. Image Capture & Measurement 8. Advanced Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital microscope head, LED illumination ring, USB cable, Measurement software, Adjustable stand, Calibration slide.

Feature	Description
Magnification Range	10x to 200x optical/software enhanced
LED Illumination	Adjustable brightness with polarized options
Resolution	Up to 5.0 megapixels
Connectivity	USB 2.0/3.0 for power and data transfer
Software	DinoCapture 2.0 with measurement tools
Focus Control	Manual fine-focus adjustment wheel
Image Capture	Still images and video recording
Measurement	Length, angle, radius, area calculations
Stand	Adjustable height and tilt mechanism
Calibration	Built-in calibration for accurate measurements

Installation & Setup

Unpack and inspect all components. Ensure proper workspace setup.

Connect USB cable: Plug USB cable from microscope to computer USB port.
Install software: Run DinoCapture 2.0 installation file from provided CD or download.
Position microscope: Attach to adjustable stand or use handheld as needed.
Power on: LED lights should illuminate when connected to powered USB port.

WARNING! Handle microscope carefully; avoid dropping or impact damage. Keep lens clean and protected.

First-Time Configuration

Launch DinoCapture software and configure initial settings.

Calibrate microscope: Use calibration slide following software prompts.
Adjust illumination: Set LED brightness appropriate for sample.
Set resolution: Choose image resolution based on application needs.
Configure save locations: Set default folders for images and videos.
Test functions: Verify image capture, measurement, and video recording.

CAUTION! Ensure proper calibration for accurate measurements. Avoid direct eye exposure to LED illumination.

Specifications

Magnification: 10x-200x (optical/digital combination)
Sensor: 5.0 megapixel CMOS
Frame Rate: Up to 30fps at full resolution
LED Lights: 8 white LEDs, adjustable intensity
Interface: USB 2.0/3.0 compatible
Software: DinoCapture 2.0 (Windows/Mac)
Measurement Accuracy: ±3% with proper calibration
Working Distance: 10mm to 200mm depending on model
Power: USB powered (5V DC)
Dimensions: 120mm length, 32mm diameter

Controls and Functions

Microscope body controls: Focus wheel, LED brightness adjustment, Capture button.

Software Interface: Live view, Capture, Video record, Measurement tools, Annotation, Calibration, Settings.

Image Settings: Brightness, Contrast, Gamma, White balance, Exposure. Measurement: Length, Angle, Radius, Area, Perimeter. Annotation: Text, arrows, shapes, scale bars. Export: JPEG, BMP, PNG, TIFF formats.

Software Installation

DinoCapture 2.0 provides full functionality for image capture and analysis.

System requirements: Windows 7/8/10/11 or Mac OS X 10.9+
Installation: Run setup file, follow installation wizard
Driver installation: Automatic driver installation upon first connection
Software registration: Optional registration for updates and support

Tip: Ensure computer meets minimum system requirements before installation.

Image Capture & Measurement

Comprehensive image analysis and measurement capabilities.

Live view: Position sample and adjust focus using wheel
Capture image: Click capture button or use software capture
Take measurements: Select measurement tool, click points on image
Record video: Click record button, set duration and frame rate
Annotate: Add text, arrows, and other annotations
Save results: Export images with measurements and annotations
Generate reports: Create measurement reports with multiple images

WARNING! Ensure proper calibration before taking measurements. Clean lens regularly for accurate results.

Advanced Features

Extended Measurement: Multiple measurement types with statistical analysis. EDOF (Extended Depth of Field): Image stacking for enhanced focus. Time Lapse: Automated image capture at set intervals. Custom Calibration: User-defined calibration for specific applications.

Care & Maintenance

Disconnect USB before cleaning. Use lens cleaning tissue and air blower only.

CAUTION! Do not use solvents or abrasive cleaners. Store in protective case when not in use.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. CE marked for European compliance. RoHS compliant for hazardous substances. Copyright © 2024 Dino Lite; trademarks of AnMo Electronics Corporation. For technical support, visit www.dino-lite.com or contact [email protected].

Troubleshooting

Symptom	Possible Cause	Corrective Action
No image displayed	USB connection/software	Check USB connection; reinstall software drivers; try different USB port.
Poor image quality	Focus/illumination	Adjust focus wheel; optimize LED brightness; clean lens.
Software not recognizing device	Driver issues	Reinstall drivers; check device manager; restart computer.
Measurements inaccurate	Calibration	Recalibrate using calibration slide; ensure proper working distance.
LED lights not working	Power/USB	Check USB power; try different computer; test with USB power meter.

Reset: Disconnect and reconnect USB; restart software.

Service: [email protected]; www.dino-lite.com