Dino Raiden Car Seat Manual

The Dino Raiden Car Seat is a premium child safety seat designed for children weighing 9-36 kg (approximately 9 months to 12 years). Features include 5-point harness system, side impact protection, adjustable headrest, multiple recline positions, ISOFIX compatibility, easy installation, removable and washable covers, and compliance with ECE R44/04 safety standards. Below are key sections for safety, features, installation, setup, operation, and maintenance.

1. Features at a Glance 2. Safety Information 3. Installation Guide 4. Specifications 5. Controls and Adjustments 6. Harness System 7. Maintenance & Cleaning 8. Storage & Transport 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: 5-point safety harness, Side Impact Protection (SIP), adjustable headrest, multiple recline positions, ISOFIX connectors, cup holder, removable covers.

Feature	Description
5-point harness	Shoulder straps, hip straps, and crotch buckle for maximum safety
Side Impact Protection	Enhanced side wings for head and body protection
Adjustable headrest	10-position height adjustment for growing children
Recline positions	3-position recline for comfort and proper installation
ISOFIX connectors	Quick and secure vehicle attachment system
Cup holder	Removable cup holder for drinks and snacks
Harness adjuster	One-pull harness tightening system
Headrest button	Easy height adjustment mechanism
Recline lever	Quick recline position changes
Buckle release	Easy harness buckle operation

Safety Information

Read all instructions before installation and use.

Always use in rear-facing position for children under 15 kg.
Ensure harness straps are snug against child's body.
Check installation before each use.
Do not use with damaged parts or after accident.

WARNING! Never leave child unattended in car seat. Ensure proper installation to prevent injury in case of accident.

Installation Guide

Follow these steps for proper installation.

Position car seat in vehicle: Choose rear seat position.
ISOFIX installation: Attach ISOFIX connectors to vehicle anchors until green indicator shows.
Seat belt installation: Thread vehicle seat belt through guides; ensure tight fit.
Adjust recline: Use recline lever for proper angle.
Secure child: Place child in seat and fasten harness.

CAUTION! Ensure car seat does not move more than 2.5 cm side-to-side or front-to-back when installed.

Specifications

Weight Range: 9-36 kg (Group 1/2/3)
Age Range: 9 months to 12 years
Harness Slots: 5 adjustable positions
Recline Positions: 3 positions
Headrest Adjustment: 10 height positions
Safety Standard: ECE R44/04 certified
Dimensions: 44 x 48 x 67-82 cm (WxDxH)
Weight: 8.2 kg
Materials: High-impact ABS plastic, EPS foam, polyester fabric

Controls and Adjustments

Access all adjustments via front and side controls.

Headrest Adjustment: Press headrest button and slide up/down to desired height.

Harness Adjustment: Pull harness adjuster strap to tighten; press buckle release to open.

Recline Adjustment: Lift recline lever and adjust seat angle to one of 3 positions.

ISOFIX Installation: Extend ISOFIX connectors, attach to vehicle anchors until green indicator shows secure connection.

Harness System

Proper harness usage is critical for safety.

Shoulder straps: Should be at or above child's shoulders.
Harness tightness: Should be snug - only one finger should fit between harness and child's collarbone.
Chest clip: Position at armpit level.
Buckle: Ensure audible click when fastened.

Tip: Check harness fit each time child is secured in seat.

Maintenance & Cleaning

Regular maintenance ensures longevity and safety.

Remove covers: Unzip and remove fabric covers according to instructions.
Machine wash: Use cold water, mild detergent, gentle cycle.
Air dry: Hang to dry completely; do not tumble dry.
Plastic parts: Wipe with damp cloth and mild soap.
Harness: Clean with damp cloth only; do not immerse in water.

WARNING! Do not use bleach or harsh chemicals. Ensure all parts are completely dry before reassembly.

Storage & Transport

Store car seat properly when not in use.

Storage: Keep in cool, dry place away from direct sunlight. Transport: Use carrying handle for short distances.

CAUTION! Do not place heavy objects on car seat during storage. Avoid extreme temperatures.

Regulatory Information

ECE R44/04: Certified for European safety standards. Manufactured under ISO 9001 quality standards. Copyright © 2025 Dino Safety Systems; all rights reserved. For support, visit www.dinoraiden.com or contact +44 (0)800 123 4567.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Harness won't tighten	Twisted straps/obstruction	Check for twisted straps; remove obstructions from adjuster mechanism.
ISOFIX not locking	Dirt/misalignment	Clean connectors; ensure proper alignment with vehicle anchors.
Headrest stuck	Debris in mechanism	Clean tracks; apply gentle pressure while adjusting.
Recline not working	Lever not fully engaged	Ensure lever is completely released; check for obstructions.
Buckle difficult to fasten	Debris in buckle	Clean buckle area; ensure harness tongues are properly aligned.

Service: +44 (0)800 123 4567; www.dinoraiden.com