dino twin t2 manual

The Dino Twin T2 is a dual-function electric scooter designed for urban commuting with enhanced safety features, dual motor system, foldable design, LED lighting, digital display, and regenerative braking. Powered by 36V lithium-ion battery with 25km range. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Riding Operation 8. Safety Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Dual 250W motors, foldable frame, LED headlight/taillight, digital speedometer, thumb throttle, disc brakes, and charging port.

Feature	Description
Dual Motors	Two 250W brushless motors for enhanced power
Battery	36V 7.5Ah lithium-ion removable battery
Max Speed	25 km/h (15.5 mph)
Range	Up to 25 km per charge
Load Capacity	120 kg (264 lbs)
Folding Mechanism	Quick-release folding system
Braking System	Front and rear disc brakes with regenerative braking
Display	LCD digital display showing speed, battery, mode
Lighting	LED headlight and taillight for visibility
Charging Time	4-5 hours for full charge

Installation

Unpack and inspect contents. Assemble handlebar and attach accessories.

Unfold scooter: Release folding latch and extend handlebar to locked position.
Install handlebar: Secure with quick-release mechanism.
Charge battery: Connect charger to scooter and wall outlet.
Check tires: Ensure proper inflation (35-50 PSI).

WARNING! Always wear helmet and protective gear. Check all fasteners before riding.

First-Time Setup

Power on scooter; configure initial settings.

Charge battery: Fully charge before first use (4-5 hours).
Power on: Press and hold power button for 3 seconds.
Set riding mode: Use MODE button to select (Eco/Normal/Sport).
Check display: Verify battery level and speed settings.
Test brakes: Ensure proper braking function before riding.

CAUTION! Do not exceed weight limit. Avoid riding in wet conditions.

Specifications

Model: Dino Twin T2 Electric Scooter
Motors: Dual 250W brushless hub motors
Battery: 36V 7.5Ah lithium-ion
Max Speed: 25 km/h
Range: 20-25 km
Weight: 15 kg
Tires: 8.5-inch pneumatic
Brakes: Front and rear disc brakes + regenerative
Charging: 4-5 hours
Water Resistance: IP54

Controls and Settings

Access controls via handlebar buttons and LCD display.

Handlebar Controls: Power button, Mode selector, Thumb throttle, Brake levers, Headlight switch.

Display Information: Speed, Battery level, Riding mode, Odometer, Error codes. Settings: Speed limit adjustment, Cruise control, Unit selection (km/h or mph), Backlight brightness.

Connecting Devices

Mobile app connectivity for firmware updates and ride statistics.

Download Dino Ride app from app store.
Enable Bluetooth on smartphone.
Pair with scooter via app interface.
Access ride data and settings through app.

Tip: Ensure scooter is powered on and within Bluetooth range (10m).

Riding Operation

Supports three riding modes with varying speed and power.

Start riding: Push off and gently press throttle.
Acceleration: Gradually increase throttle pressure.
Braking: Apply both brake levers evenly.
Turning: Lean into turns while maintaining control.
Folding: Release latch and fold handlebar down.
Parking: Engage kickstand on level surface.

WARNING! Always obey traffic laws. Avoid sudden acceleration or braking.

Safety Features

Regenerative braking: Converts braking energy to battery charge. LED lighting: Front and rear lights for visibility. Speed limiting: Adjustable maximum speed settings.

Care & Maintenance

Regular maintenance ensures optimal performance and longevity.

Clean with damp cloth; avoid high-pressure water.
Check tire pressure weekly (35-50 PSI).
Inspect brakes regularly for wear.
Store in dry place away from extreme temperatures.

CAUTION! Do not use harsh chemicals. Disconnect power before cleaning.

Regulatory Information

CE certified: Complies with European safety standards. FCC Part 15: Class B digital device. Copyright © 2025 Dino Mobility; all rights reserved. For support, visit www.dinomobility.com or contact +1-800-DINO-T2.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Scooter won't power on	Low battery/faulty connection	Charge battery; check power button; inspect wiring.
Reduced range	Battery age/riding conditions	Check tire pressure; avoid steep hills; replace if old battery.
Brakes not responsive	Worn pads/air in lines	Inspect brake pads; bleed brake lines if necessary.
Error code on display	System fault	Consult error code chart in manual; reset system.
Motor cutting out	Overheating/connection issue	Allow to cool; check motor connections; avoid overload.

Reset: Hold power + mode buttons for 10 seconds.

Service: +1-800-DINO-T2; www.dinomobility.com