Dinofire Wireless Presenter User Manual

The Dinofire Wireless Presenter is a professional presentation remote with 2.4GHz wireless technology, USB receiver, laser pointer, page up/down controls, built-in rechargeable battery, plug-and-play functionality, compatibility with Windows/Mac systems, and effective range up to 50 feet. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Wireless presenter, USB receiver, Laser pointer, Page navigation buttons, Built-in rechargeable battery.

Package Contents

Unpack and verify all components are present.

1. Dinofire Wireless Presenter (1 unit)
2. USB Wireless Receiver (1 unit)
3. Micro USB Charging Cable (1 unit)
4. User Manual (this document)
5. Protective Storage Pouch (1 unit)

WARNING! Keep small parts away from children to prevent choking hazard.

Installation & Setup

Quick and easy setup process.

1. Insert USB receiver into computer's USB port
2. Turn on presenter using power switch
3. Wait for connection indicator to show stable light
4. Open your presentation software (PowerPoint, Keynote, etc.)
5. Begin using the presenter for navigation and pointing

CAUTION! Do not stare directly into laser beam. Keep away from eyes.

Specifications

• Wireless Frequency: 2.4GHz
• Effective Range: Up to 50 feet (15 meters)
• Laser Color: Red (650nm)
• Laser Class: Class II
• Battery: Built-in 300mAh lithium battery
• Charging Time: Approximately 2 hours
• Usage Time: Up to 20 hours continuous use
• Compatibility: Windows 7/8/10/11, Mac OS X 10.9+, Linux
• Receiver: Nano USB 2.0
• Weight: 45g (presenter only)

Controls and Functions

Front controls: Laser button, Forward page, Backward page.

Side controls: Power switch, Charging port.

Laser Pointer: Press and hold laser button to activate red beam. Page Navigation: Forward button advances slides, Backward button returns to previous slides. Power Management: Power switch turns device on/off, indicator shows battery status. Charging: Connect micro USB cable for battery charging.

Battery Charging

Built-in rechargeable battery with micro USB charging.

1. Connect micro USB cable to charging port on presenter
2. Connect other end to USB power source (computer or adapter)
3. Red indicator light shows charging in progress
4. Green light indicates full charge (approximately 2 hours)
5. Disconnect when fully charged to preserve battery life

Tip: Fully charge before first use for optimal performance.

Using the Presenter

Supports PowerPoint, Keynote, Google Slides, and other presentation software.

1. Power on presenter and ensure USB receiver is connected
2. Open your presentation file
3. Start slideshow mode in your presentation software
4. Use forward button to advance to next slide
5. Use backward button to return to previous slide
6. Press and hold laser button to highlight key points
7. Move freely within 50-foot range during presentation
8. Power off when not in use to conserve battery

WARNING! Do not point laser at people or animals. Avoid reflective surfaces.

Compatibility

Works with major presentation software and operating systems.

Care & Maintenance

Proper care ensures long device life.

1. Store in protective pouch when not in use
2. Keep away from extreme temperatures and moisture
3. Clean with dry, soft cloth only
4. Do not disassemble or attempt repairs
5. Keep USB receiver in storage slot when transporting

CAUTION! Do not expose to water or other liquids. Avoid dropping.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. CE certified for European market. Laser safety: Class II laser product, complies with 21 CFR 1040.10. For support, visit www.dinofire.com or contact [email protected].

Troubleshooting

Reset: Turn off presenter, remove and reinsert USB receiver, restart computer if needed.

Service: [email protected]; www.dinofire.com/support