Dinotte 200L Manual

The Dinotte 200L is a high-performance bicycle lighting system featuring 200 lumens output, multiple lighting modes, rechargeable lithium-ion battery, weather-resistant construction, adjustable mounting bracket, runtime up to 12 hours, and intelligent power management. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: LED light head, rechargeable battery pack, mounting bracket, USB charging cable, weather-resistant seals.

Feature	Description
Light Output	200 lumens maximum brightness
Battery Type	Lithium-ion rechargeable
Runtime	Up to 12 hours on low setting
Lighting Modes	High, Medium, Low, Flash, Pulse
Charging Port	Micro-USB for convenient charging
Mounting System	Adjustable handlebar bracket
Water Resistance	IPX4 rated for weather resistance
Power Button	Cycles through lighting modes
Battery Indicator	LED status lights for battery level
Weight	Lightweight design at 150g

Installation

Unpack and inspect all components. Ensure mounting surface is clean and dry.

1. Attach mounting bracket: Position on handlebar and secure with provided clamp.
2. Install light head: Slide light into bracket until it clicks securely.
3. Connect battery: Route cable neatly and connect to light head.
4. Secure battery: Use Velcro strap to attach battery to frame or seatpost.

WARNING! Ensure all connections are secure before riding. Test light operation before use.

First-Time Setup

Charge battery fully before first use.

1. Initial charge: Connect to USB power source for 4 hours.
2. Power on: Press and hold power button for 2 seconds.
3. Select mode: Cycle through modes with short presses.
4. Adjust angle: Loosen bracket to aim light beam properly.

CAUTION! Do not look directly into LED when powered on.

Specifications

• Light Output: 200 lumens maximum
• LED Type: High-efficiency CREE LED
• Battery Capacity: 2000mAh lithium-ion
• Charging Time: 4 hours from empty
• Runtime: 2 hours (High) to 12 hours (Low)
• Beam Pattern: Optimized for road visibility
• Water Resistance: IPX4 (splash resistant)
• Operating Temperature: -10°C to 40°C
• Weight: 150g complete system
• Warranty: 2 years limited warranty

Controls and Settings

Single button operation for all functions. Front panel: Power/Mode button, battery status LEDs.

Operation: Press and hold 2 seconds to power on/off. Short press to cycle modes: High → Medium → Low → Flash → Pulse.

Battery Indicator: Green (75-100%), Yellow (25-75%), Red (0-25%), Flashing Red (needs charge). Settings: Automatic power reduction when battery low. Memory function remembers last used mode.

Charging the Battery

Use included USB cable and any USB power source.

1. Connect cable: Plug micro-USB into charging port.
2. Connect power: Plug other end into USB charger or computer.
3. Monitor charging: Red LED indicates charging, Green indicates full.
4. Disconnect: Unplug when charging complete (approximately 4 hours).

Tip: Charge after each use for maximum battery life.

Mounting Options

Standard handlebar mount included. Optional helmet mount available.

1. Handlebar mount: Fits diameters 22.2mm to 31.8mm.
2. Helmet mount: Use adhesive pad for secure attachment.
3. Adjustment: Loosen knob to adjust beam angle.
4. Security: Quick-release mechanism for theft prevention.

WARNING! Ensure mount is tight and secure before riding.

Maintenance

Regular maintenance ensures optimal performance.

1. Cleaning: Wipe with damp cloth, dry thoroughly.
2. Storage: Store in cool, dry place when not in use.
3. Battery care: Charge every 3 months if not used regularly.
4. Inspection: Check mounts and cables for wear regularly.

CAUTION! Do not immerse in water. Do not use harsh chemicals.

Safety Information

Always use as intended for bicycle illumination.

• Not for use as emergency vehicle lighting
• Do not modify or disassemble
• Keep away from children
• Use only provided charging cable
• Do not expose to extreme temperatures

Regulatory Information

FCC Part 15: Class B digital device compliant. CE certified for European markets. RoHS compliant. Copyright © 2025 Dinotte Lighting Systems. For support, visit www.dinottelighting.com or contact 1-800-555-1234.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Light won't turn on	Battery depleted	Charge battery for 4 hours
Dim output	Low battery	Recharge battery
Not charging	Faulty cable/connection	Try different USB cable/power source
Mount loose	Insufficient tightening	Tighten mounting clamp securely
Mode not changing	Button stuck	Clean around button, ensure free movement

Reset: Disconnect battery for 30 seconds then reconnect.

Service: 1-800-555-1234; www.dinottelighting.com