dionic 90 manual

The dionic 90 is a professional-grade battery system designed for broadcast and film industry applications, featuring 90Wh capacity, multiple power output options, intelligent battery management system, LCD display with runtime information, built-in charging circuitry, and compatibility with various professional video equipment. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Charging and Maintenance 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Lithium-ion battery pack, LCD status display, Power button, DC output ports, Charging input, Battery level indicators.

Feature	Description
Battery Capacity	90Wh high-capacity lithium-ion
LCD Display	Shows remaining runtime, voltage, and health status
DC Output Ports	Multiple ports for professional equipment
Charging Input	Fast charging capability
Power Button	Turns battery on/off
Battery Level Indicators	LED indicators for quick status check
Intelligent BMS	Battery Management System for safety
Temperature Monitoring	Prevents overheating
Short Circuit Protection	Automatic shutdown in case of faults
Overload Protection	Protects connected equipment

Installation

Unpack and inspect contents. Ensure all components are present.

Mounting: Attach to compatible camera or equipment using mounting plate.
Connection: Connect DC output to equipment using appropriate cable.
Power verification: Press power button to verify battery operation.
Initial charge: Charge fully before first use.

WARNING! Battery is heavy; handle with care. Ensure secure mounting to prevent drops.

First-Time Setup

Prepare battery for initial use.

Initial charge: Connect to charger until full charge indicated.
Equipment connection: Connect to compatible device.
Power on: Press and hold power button for 3 seconds.
Status check: Verify LCD display shows proper voltage and capacity.

CAUTION! Use only compatible chargers and cables. Do not modify connections.

Specifications

Capacity: 90Wh lithium-ion
Voltage: 14.4V nominal
Chemistry: Lithium-ion polymer
Output Ports: Multiple DC outputs
Charging Time: Approximately 2 hours to full charge
Operating Temperature: -10°C to 45°C
Storage Temperature: -20°C to 60°C
Weight: Approximately 600g
Dimensions: Standard professional battery size

Controls and Settings

Access functions via power button and LCD display.

Controls: Power button (press and hold for 3 seconds), LCD display menu navigation.

Display Information: Remaining runtime, voltage output, battery health, temperature status, charge cycles. Settings: Power saving mode, display brightness, auto-shutdown timer, calibration mode.

Connecting Devices

Compatible with professional video equipment, cameras, and monitors.

Ensure battery is powered off before connecting.
Use manufacturer-approved cables and adapters.
Connect DC output to equipment power input.
Power on equipment before turning on battery.

Tip: Always check polarity and voltage requirements before connection.

Charging and Maintenance

Proper charging extends battery life and performance.

Charging: Connect to compatible charger; LED indicates charging status.
Full charge: LCD shows 100% and charging indicator turns off.
Storage: Store at 40-60% charge if not used for extended periods.
Calibration: Perform full discharge/charge cycle monthly for accurate readings.
Temperature: Charge at room temperature (20-25°C) for best results.

WARNING! Do not charge unattended. Use only approved chargers.

Safety Features

Overcharge protection, Over-discharge protection, Short circuit protection, Temperature monitoring, Cell balancing, Over-current protection.

Care & Cleaning

Disconnect from all devices before cleaning. Use dry, soft cloth only.

CAUTION! Do not use liquids or solvents. Keep contacts clean and dry.

Regulatory Information

Complies with international safety standards including UL, CE, and RoHS. Lithium-ion battery regulations apply. For support, visit manufacturer website or contact customer service. Copyright © 2025 dionic; all rights reserved.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Battery not charging	Charger/connections	Check charger connection; verify power source; try different outlet.
No power output	Battery depleted/protection	Charge battery; check for overload protection activation.
LCD display blank	Battery drained/defect	Charge battery; if persists, contact service.
Short runtime	Aging battery/high load	Check equipment power draw; consider battery replacement if old.
Overheating	High ambient temp/overload	Allow to cool; reduce load; move to cooler environment.

Reset: Disconnect all devices and recharge if available.

Service: Contact manufacturer support for battery service.