diplomat dishwasher instruction manual adp8322

The Diplomat ADP8322 is a built-in dishwasher featuring multiple wash programs, energy-efficient operation, adjustable racks, child safety lock, delay start function, and soil sensors. With a capacity of 12 place settings, this dishwasher offers quiet operation at 49 dB, various temperature settings, and eco-friendly water consumption. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading Guidelines 7. Operating Programs 8. Maintenance & Cleaning 9. Safety Features 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Electronic control panel, adjustable upper rack, cutlery basket, filter system, salt container, rinse aid dispenser.

FeatureDescription
Wash ProgramsAuto, Intensive, Eco, Quick, Glass, Rinse
Delay Start1-24 hour delay timer
Child LockPrevents accidental program changes
Half LoadEnergy saving for partial loads
Soil SensorAutomatically adjusts water and time
Water SoftenerBuilt-in salt container for hard water areas
Rinse Aid DispenserAdjustable for better drying results
Drying OptionsExtra Dry, Eco Dry settings
Noise Level49 dB for quiet operation
Energy RatingA++ for energy efficiency

Installation

Unpack and inspect contents. Ensure proper electrical and water connections.

  1. Position dishwasher: Level the appliance using adjustable feet.
  2. Connect water supply: Attach inlet hose to cold water tap (max pressure 1 MPa).
  3. Connect drainage: Ensure drain hose is properly secured without kinks.
  4. Electrical connection: Plug into grounded 220-240V, 50Hz outlet.
  5. Secure to counter: Use mounting brackets for built-in installation.

WARNING! Only qualified technicians should install. Ensure water and electrical connections are secure before use.

First-Time Setup

Before first use, prepare the dishwasher for operation.

  1. Remove shipping materials: Check interior for protective films and remove.
  2. Fill salt container: Add special dishwasher salt to the softener unit.
  3. Fill rinse aid: Pour rinse aid into designated dispenser.
  4. Run initial cycle: Select Intensive program without dishes to clean interior.
  5. Set water hardness: Adjust softener setting according to local water hardness.

CAUTION! Use only recommended dishwasher salt and rinse aid products.

Specifications

Controls and Settings

Electronic control panel with LED display and touch buttons.

Main Controls: POWER, PROGRAM SELECTION, DELAY START, CHILD LOCK, START/PAUSE

Program Selection: Auto (soil sensor), Intensive (70°C), Eco (50°C), Quick (30 min), Glass (40°C), Rinse. Additional Options: Half Load, Extra Dry, Delay Start (1-24h), Temperature Selection (45°C, 55°C, 65°C, 70°C). Settings Menu: Water hardness, Rinse aid dosage, Acoustic signals, Factory reset.

Loading Guidelines

Proper loading ensures optimal cleaning results.

  1. Upper rack: Cups, glasses, small plates - adjustable height
  2. Lower rack: Plates, bowls, pots - fold-down tines for large items
  3. Cutlery basket: Knives, forks, spoons - separate compartments
  4. Pre-rinsing: Not necessary - scrape food residues only
  5. Loading tips: Avoid nesting items, ensure water spray reaches all surfaces

Tip: Place heavily soiled items facing the center spray arm for better cleaning.

Operating Programs

Select appropriate program based on load type and soil level.

  1. Auto Program: Soil sensor automatically adjusts time, water, and temperature
  2. Intensive: 70°C for heavily soiled pots and pans (150 min)
  3. Eco: 50°C for normally soiled loads, energy efficient (180 min)
  4. Quick: 30-minute cycle for lightly soiled items
  5. Glass: 40°C gentle cycle for delicate glassware
  6. Rinse: Cold rinse without detergent for postponed washing

WARNING! Use only dishwasher-safe items. Remove plastic labels before washing.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

  1. Clean filters: Remove and rinse under running water weekly
  2. Spray arms: Check for blockages and clean monthly
  3. Door seals: Wipe clean with damp cloth
  4. Interior: Run empty cycle with dishwasher cleaner monthly
  5. Exterior: Clean with mild detergent and soft cloth

CAUTION! Unplug before cleaning. Do not use abrasive cleaners or sharp objects.

Safety Features

Child Lock: Press and hold CHILD LOCK for 3 seconds to activate/deactivate. Overflow Protection: Automatic water shut-off if leak detected. Thermal Protection: Prevents overheating. Door Safety: Dishwasher stops if door opened during operation.

Regulatory Information

CE certified: Complies with European safety standards. Energy Label: A++ rating according to EU regulation 1059/2010. RoHS compliant: Free of hazardous substances. Waste Electrical: Dispose according to WEEE directive. For support, visit www.diplomat-appliances.com or contact customer service at +44 1234 567890.

Troubleshooting

SymptomPossible CauseCorrective Action
Dishwasher not startingPower supply/doorCheck power cord; ensure door properly closed; check child lock
Poor cleaning resultsLoading/detergentImprove loading; check spray arms; use fresh detergent
Water not drainingDrain hose/filterCheck drain hose for kinks; clean filter; ensure proper installation
Noise during operationSpray arm/itemsCheck for items touching spray arm; ensure proper loading
Error codes displayedVarious faultsRefer to error code list in manual; reset appliance

Reset: Unplug for 5 minutes or use factory reset in settings menu.

Service: +44 1234 567890; www.diplomat-appliances.com

Diplomat Dishwasher Instruction Manual ADP8322 © - All Rights Reserved 2025