diplomat dishwasher manual adp8242

The Diplomat ADP8242 is a freestanding dishwasher with 12 place settings, energy efficiency class A, 7 wash programs including Intensive, Eco, Quick, and Delicate cycles, half-load function, child lock, delay start (1-24 hours), adjustable upper basket, salt and rinse aid indicators, and acoustic end-of-cycle signal. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Maintenance 9. Safety Features 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with program selector, detergent dispenser, upper and lower baskets, cutlery basket, filters, salt container, rinse aid dispenser.

FeatureDescription
Wash programs7 programs including Intensive, Eco, Quick, Delicate
Capacity12 place settings
Energy classA (energy efficient)
Half-load functionReduces water and energy for smaller loads
Delay start1-24 hour delay timer
Child lockPrevents accidental program changes
Adjustable upper basketHeight adjustable for taller items
Salt indicatorShows when water softener salt is needed
Rinse aid indicatorShows when rinse aid needs refilling
Acoustic signalBeeps when cycle completes

Installation

Unpack and inspect contents. Position near water supply and drainage.

  1. Level the dishwasher: Adjust feet until unit is stable and level.
  2. Connect water supply: Attach inlet hose to cold water supply (max 1MPa pressure).
  3. Connect drainage: Ensure drain hose is properly secured to sink or waste pipe.
  4. Connect to power: Plug into grounded electrical outlet (220-240V, 50Hz).

WARNING! Ensure water connections are tight to prevent leaks. Use only certified plumbing connections.

First-Time Setup

Before first use, prepare the dishwasher for operation.

  1. Remove shipping materials: Take out all packaging from interior.
  2. Fill salt container: Add special dishwasher salt to water softener.
  3. Fill rinse aid: Pour rinse aid into dispenser until indicator shows full.
  4. Run initial cycle: Run empty on Intensive program with detergent.
  5. Set water hardness: Adjust softener setting according to local water hardness.

CAUTION! Use only dishwasher salt and rinse aid specifically designed for dishwashers.

Specifications

Controls and Settings

Control panel includes program selector, start/pause button, delay timer, half-load button, and indicator lights.

Program Selection: Turn knob to select desired wash program. Start/Pause: Press to start or pause cycle. Delay Timer: Set delay from 1-24 hours. Half-load: Reduces water and energy for smaller loads. Child Lock: Press and hold for 3 seconds to activate/deactivate.

Indicator lights show: Program progress, Salt level, Rinse aid level, Child lock active.

Loading the Dishwasher

Proper loading ensures optimal cleaning results.

  1. Scrape off large food particles before loading.
  2. Load lower basket: Plates, pots, pans facing center.
  3. Load upper basket: Cups, glasses, bowls.
  4. Cutlery basket: Place knives pointing down for safety.
  5. Adjust upper basket: Lift to accommodate taller items.
  6. Ensure items don't block spray arms.

Tip: Do not overload; leave space between items for water circulation.

Using Wash Programs

Select appropriate program for load type and soil level.

  1. Intensive: Heavily soiled pots and pans (85°C)
  2. Eco: Normally soiled dishes, energy efficient (50°C)
  3. Quick: Lightly soiled, rapid cycle (45 minutes)
  4. Delicate: Glassware and fine china (40°C)
  5. Auto: Automatically adjusts to soil level
  6. Rinse: Rinse only, no detergent
  7. Pre-wash: For heavily soiled items before main wash

WARNING! Use only dishwasher detergent. Regular soap creates excess suds.

Maintenance

Regular maintenance ensures optimal performance and longevity.

  1. Clean filters: Remove and rinse under running water weekly.
  2. Check spray arms: Ensure holes are not clogged.
  3. Refill salt: When salt indicator lights up.
  4. Refill rinse aid: When rinse aid indicator shows low.
  5. Clean door seal: Wipe with damp cloth to remove debris.
  6. Run cleaning cycle: Use dishwasher cleaner monthly.

CAUTION! Unplug before any maintenance. Do not use abrasive cleaners.

Safety Features

Child lock: Prevents program changes during operation. Overflow protection: Automatically stops water if leak detected. Thermal cut-out: Prevents overheating. Door safety: Stops operation when door opened.

Regulatory Information

CE certified. Complies with EU energy efficiency standards. Water consumption meets EU ecodesign requirements. For support, visit www.diplomat-appliances.com or contact customer service at +44 (0) 1234 567890.

Troubleshooting

SymptomPossible CauseCorrective Action
Dishwasher not startingDoor not closed properly/powerEnsure door fully closed; check power connection; reset circuit breaker.
Poor cleaning resultsSpray arms blocked/wrong detergentClean spray arms; use correct detergent amount; check water temperature.
Water not drainingDrain hose blocked/filter cloggedCheck drain hose for kinks; clean filter; ensure proper installation height.
White residue on dishesInsufficient rinse aid/water hardnessIncrease rinse aid dosage; check salt level; adjust water softener setting.
Unusual noisesItems touching spray arms/loose partsReposition items; check for loose utensils; ensure proper loading.

Reset: Turn off power for 5 minutes, then restart.

Service: +44 (0) 1234 567890; www.diplomat-appliances.com

diplomat dishwasher manual adp8242 © - All Rights Reserved 2025