Diplomat Double Watch Winder Manual

The Diplomat Double Watch Winder is a premium automatic watch winder designed to keep two automatic watches fully wound and ready to wear. Features include programmable rotation settings, multiple rotation directions, quiet Japanese Mabuchi motor technology, LCD display, built-in rechargeable battery, and luxurious storage case. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Watch Placement 7. Programming Modes 8. Battery Operation 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Dual watch compartments, LCD control panel, power adapter, built-in rechargeable battery, travel case.

Feature	Description
Rotation Modes	Clockwise, Counterclockwise, Alternating, Bi-directional
TPD Settings	650, 750, 850, 950, 1050, 1150 turns per day
Motor Technology	Quiet Japanese Mabuchi motor
Power Source	AC adapter and built-in rechargeable battery
LCD Display	Shows mode, battery level, rotation status
Watch Pillows	Adjustable for different watch sizes
Storage Case	Luxury wood or leather exterior
Rest Periods	Programmable rest intervals between rotations
Battery Indicator	LCD shows remaining battery power
Travel Lock	Security feature for transportation

Installation

Unpack and inspect contents. Place on stable, level surface.

Remove protective packaging from watch pillows and interior.
Connect power adapter: Plug into wall outlet and winder DC input.
Position winder: Ensure adequate ventilation around unit.
Initial charge: Allow battery to charge fully before first use.

WARNING! Do not place near heat sources or in direct sunlight. Keep away from moisture.

First-Time Setup

Power on winder; follow LCD display prompts.

Initial charge: Connect power adapter and charge for 8 hours.
Watch placement: Adjust pillows to fit watch size securely.
Mode selection: Press MODE button to choose rotation pattern.
TPD setting: Use UP/DOWN buttons to select turns per day.
Start operation: Press START/STOP to begin winding.

CAUTION! Ensure watches are securely placed on pillows before starting.

Specifications

Capacity: 2 automatic watches
Rotation Directions: Clockwise, Counterclockwise, Alternating
TPD Range: 650-1150 turns per day
Motor: Japanese Mabuchi ultra-quiet motor
Power Input: 100-240V AC, 50/60Hz
Battery: Built-in rechargeable lithium battery
Battery Life: Up to 3 months on single charge
Noise Level: Less than 15 dB
Materials: Wood/leather exterior, soft interior lining
Dimensions: Standard dual-watch winder size

Controls and Settings

Access settings via front panel buttons and LCD display.

Control Panel: POWER, MODE, SET, UP, DOWN, START/STOP

Rotation Modes: Clockwise (CW), Counterclockwise (CCW), Alternating (ALT), Bi-directional (BI). TPD Settings: 650, 750, 850, 950, 1050, 1150 turns per day. Rest Periods: Programmable intervals from 2-12 hours. Battery Mode: Automatic power saving when operating on battery.

Watch Placement

Proper watch placement ensures optimal winding and security.

Adjust pillows: Expand or compress to fit watch band size.
Position watch: Place watch centered on pillow.
Secure placement: Ensure watch sits firmly without wobbling.
Close lid: Gently close cover until it clicks shut.

Tip: Remove watch when not using winder for extended periods.

Programming Modes

Customize winding patterns for different watch requirements.

Select mode: Press MODE button to cycle through options.
Set TPD: Use UP/DOWN to choose turns per day.
Program rest: Hold SET for 3 seconds to set rest intervals.
Save settings: Settings automatically save when changed.
Start winding: Press START/STOP to begin programmed cycle.

WARNING! Do not open lid while winder is operating.

Battery Operation

Built-in battery provides portable winding capability.

Full charge: Requires 8 hours for complete charge.
Battery indicator: LCD shows remaining power level.
Auto power save: Reduces power consumption on battery.
Charging: Connect AC adapter to recharge.

Note: Battery life varies based on rotation settings and frequency of use.

Care & Cleaning

Unplug before cleaning. Use soft, dry cloth for exterior.

CAUTION! Do not use liquids or chemicals. Keep interior dry and dust-free.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. CE certified for European markets. Copyright © 2025 Diplomat Watch Winders; all rights reserved. For support, visit www.diplomatwatchwinders.com or contact customer service at 1-800-555-0199.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Winder not starting	Power/battery	Check power connection; ensure battery charged; reset unit.
No rotation	Mode settings	Verify mode selection; check START/STOP status; reset programming.
Unusual noise	Watch placement	Ensure watch secured properly; check for obstructions.
Battery draining fast	Settings/age	Reduce TPD settings; check battery age; perform full recharge.
LCD not displaying	Power/reset	Check power source; perform system reset; contact service.

Reset: Hold POWER + MODE for 10 seconds to factory reset.

Service: 1-800-555-0199; www.diplomatwatchwinders.com