Diplomat Dual Watch Winder Manual

The Diplomat Dual Watch Winder is a premium automatic watch winder featuring dual independent winding chambers, multiple rotation settings, programmable TPD (turns per day), quiet Japanese Mabuchi motor technology, LCD display, battery backup, and elegant wood finish. Designed to keep automatic watches properly wound and ready to wear. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Watch Placement 7. Programming Modes 8. Power Options 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Dual independent winding chambers, LCD control panel, Power adapter input, Battery compartment, Mode selection buttons, Rotation direction controls.

Feature	Description
Dual chambers	Independent control for two watches simultaneously
Rotation settings	Clockwise, Counterclockwise, Alternating modes
TPD programming	650, 750, 850, 950, 1950 turns per day options
LCD display	Shows mode, battery status, rotation direction
Power options	AC adapter and battery backup capability
Quiet motor	Japanese Mabuchi motor technology for silent operation
Timer function	Programmable rest periods between winding cycles
Memory function	Retains settings during power interruption
Wood finish	Premium mahogany or walnut exterior
Watch pillows	Adjustable cushions for various watch sizes

Installation

Unpack and inspect contents. Place on stable, level surface.

Remove protective packaging from watch pillows and interior.
Connect power adapter: Plug into rear DC input jack and wall outlet.
Insert batteries: Open battery compartment, install 4 D-cell batteries for backup power.
Position winder: Ensure adequate ventilation around unit.

WARNING! Do not place near heat sources or in direct sunlight. Keep away from moisture.

First-Time Setup

Power on winder; configure initial settings.

Select rotation mode: Press MODE button to choose clockwise, counterclockwise, or alternating.
Set TPD: Use TPD button to select turns per day (650, 750, 850, 950, or 1950).
Adjust timer: Program rest periods if desired using TIMER function.
Place watches: Secure watches on adjustable pillows in winding chambers.

CAUTION! Ensure watches are securely placed on pillows to prevent damage.

Specifications

Chambers: 2 independent winding chambers
Rotation Directions: Clockwise, Counterclockwise, Alternating
TPD Settings: 650, 750, 850, 950, 1950 turns per day
Motor: Japanese Mabuchi quiet DC motor
Power Supply: DC 9V adapter (included)
Backup Power: 4 x D-cell batteries (not included)
Display: LCD with mode indicators
Construction: Wood exterior with soft-lined interior
Watch Capacity: Fits most automatic watches up to 65mm case diameter
Dimensions: 12" W x 8" D x 6" H

Controls and Settings

Access functions via front panel controls. LCD Display: Shows active mode, battery status, rotation direction.

Buttons: POWER, MODE (rotation direction), TPD (turns per day), TIMER (rest periods), RESET.

Rotation Modes: Clockwise (for most watches), Counterclockwise (for specific models), Alternating (recommended for most automatic watches). TPD Settings: 650 (low activity), 750 (normal), 850 (active), 950 (very active), 1950 (chronographs). Timer: Program rest periods from 1-12 hours between winding cycles.

Watch Placement

Proper watch positioning ensures optimal winding and prevents damage.

Adjust pillows: Expand or contract watch pillows to fit watch case snugly.
Secure watches: Place watch with crown facing outward for easy access.
Balance position: Ensure watch sits centered in chamber without touching sides.
Close lid: Gently close transparent lid until it clicks shut.

Tip: Remove watches before changing settings to prevent accidental damage.

Programming Modes

Customize winding patterns for different watch requirements.

Select rotation direction: Press MODE to cycle through options.
Set TPD: Choose appropriate turns per day based on watch movement.
Program timer: Set rest periods to simulate natural wearing patterns.
Save settings: Most settings save automatically; use RESET to restore defaults.
Dual independence: Each chamber can be programmed separately for different watches.

WARNING! Consult watch manufacturer for specific winding requirements.

Power Options

AC power with battery backup ensures continuous operation.

Primary Power: Use included 9V DC adapter for main operation. Battery Backup: Install 4 D-cell batteries for power outage protection. Power Switching: Automatic switch to battery power during AC interruption. Battery Life: Approximately 3 months continuous use on batteries alone.

Care & Cleaning

Unplug before cleaning. Use soft, dry cloth for exterior; mild cleaner for interior surfaces.

CAUTION! Do not use abrasive cleaners or solvents. Keep interior dry and free of dust.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © 2025 Diplomat Watch Winders; all rights reserved. For support, visit www.diplomatwinders.com or contact 1-800-555-9284.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Winder not operating	Power connection/batteries	Check AC adapter connection; replace batteries if needed.
Noise during operation	Watch positioning/motor	Reposition watch; ensure it's not touching chamber walls.
LCD display blank	Power issue	Check power source; reset unit by unplugging for 30 seconds.
Watch not winding	Settings/positioning	Verify TPD settings; ensure watch is properly seated on pillow.
Battery drain	Old batteries/settings	Replace with fresh alkaline batteries; check timer settings.

Reset: Press and hold RESET button for 5 seconds to restore factory settings.

Service: 1-800-555-9284; www.diplomatwinders.com