Diplomat Integrated Dishwasher ADP8322 Manual

The Diplomat ADP8322 is a fully integrated dishwasher with energy efficiency class A, 12 place settings capacity, 6 wash programs including Eco, Intensive, and Quick wash, delay start timer, child lock, half load option, and acoustic signal. Features stainless steel interior, adjustable upper basket, salt and rinse aid indicators, and LED display. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Wash Programs 8. Maintenance 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Integrated design, electronic control panel, stainless steel tub, adjustable baskets, salt and rinse aid dispensers, filter system.

Feature	Description
Capacity	12 place settings
Wash Programs	6 programs including Eco, Intensive, Quick
Energy Class	A (energy efficient)
Delay Start	1-24 hours programmable
Child Lock	Safety feature to prevent accidental operation
Half Load	Option for smaller loads to save water/energy
Acoustic Signal	Audible end of cycle indicator
LED Display	Digital program and status display
Adjustable Basket	Upper basket height adjustable
Filter System	Self-cleaning filter with easy maintenance

Installation

Unpack and inspect contents. Ensure kitchen cabinet is prepared for integration.

Position dishwasher: Slide into prepared cabinet space ensuring level placement.
Connect water supply: Attach inlet hose to cold water connection (max 1MPa pressure).
Connect drainage: Install drain hose with proper loop to prevent backflow.
Electrical connection: Connect to 220-240V, 50Hz power supply with proper grounding.
Secure installation: Fix dishwasher to adjacent cabinets using provided brackets.

WARNING! Installation must be performed by qualified technician. Ensure water and electrical connections are secure before operation.

First-Time Setup

After installation, prepare dishwasher for first use.

Remove shipping materials: Check interior for all protective packaging removal.
Fill salt container: Add special dishwasher salt to softener unit (first use requires 1.5kg).
Fill rinse aid: Add rinse aid to designated dispenser.
Run initial cycle: Select Intensive program without dishes to clean interior.
Set water hardness: Adjust softener setting according to local water hardness.

CAUTION! Use only dishwasher salt and rinse aid specifically designed for dishwashers.

Specifications

Model: ADP8322
Type: Fully Integrated Dishwasher
Capacity: 12 place settings
Energy Rating: A
Water Consumption: 12 liters per cycle (Eco program)
Power Consumption: 0.78 kWh per cycle (Eco program)
Noise Level: 49 dB
Programs: 6 wash programs + options
Dimensions (HxWxD): 815-875 x 598 x 550 mm
Voltage: 220-240V, 50Hz
Water Pressure: 0.04-1 MPa

Controls and Settings

Electronic control panel located on top of door when open.

Program Selection: Eco, Intensive, Normal, Quick, Delicate, Rinse

Options: Delay Start (1-24h), Half Load, Extra Dry, Child Lock

Indicators: Salt indicator, Rinse Aid indicator, Program progress, End of cycle

Setup Menu: Water hardness setting, Acoustic signal on/off, Factory reset

Loading the Dishwasher

Proper loading ensures optimal cleaning results.

Scrape off large food residues before loading
Lower basket: Plates, bowls, larger items facing center
Upper basket: Glasses, cups, small bowls, plastic items
Cutlery basket: Knives, forks, spoons mixed for better cleaning
Adjust upper basket: Lift to accommodate tall items in lower basket
Ensure spray arms can rotate freely without obstruction

Tip: Do not overload and ensure water can reach all surfaces.

Wash Programs

Select appropriate program based on load type and soil level.

Program	Use For	Duration	Temp
Eco	Normally soiled dishes, energy saving	180 min	50°C
Intensive	Heavily soiled pots, pans, baking dishes	150 min	70°C
Normal	Regular daily use, mixed load	120 min	65°C
Quick	Lightly soiled, quick refresh	30 min	45°C
Delicate	Crystal, fine china, delicate items	90 min	40°C
Rinse	Rinse only, no detergent	15 min	Cold

Maintenance

Regular maintenance ensures optimal performance and longevity.

Clean filters: Remove and rinse under running water weekly
Check spray arms: Ensure holes are not clogged, rotate freely
Refill salt: When salt indicator light illuminates
Refill rinse aid: When rinse aid indicator shows low
Clean door seals: Wipe with damp cloth to remove residue
Run empty cycle: Monthly with dishwasher cleaner

WARNING! Always disconnect power before performing maintenance.

Care & Cleaning

Exterior and interior care recommendations.

Exterior: Wipe control panel and door with damp cloth. Do not use abrasive cleaners.

Interior: Use only dishwasher-safe cleaning products. Avoid bleach and harsh chemicals.

Stainless Steel Tub: Wipe with soft cloth, no special maintenance required.

CAUTION! Never use solvents, scouring pads, or abrasive cleaning agents.

Regulatory Information

CE certified. Complies with European safety and efficiency standards. Energy label according to EU regulation. Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check local regulations for disposal. For support, visit www.diplomat-appliances.com or contact customer service at provided regional numbers.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher not starting	Power supply, door not closed	Check power connection; ensure door properly closed
Poor cleaning results	Spray arm obstruction, filters clogged	Check spray arms rotate freely; clean filters
Water not draining	Drain hose blocked/kinked	Check drain hose for obstructions; ensure proper installation
Noise during operation	Items obstructing spray arms	Rearrange load; ensure spray arms can rotate freely
Water leakage	Door seal damaged, connections loose	Check door seal; tighten water connections
Salt indicator on	Salt container empty	Refill with dishwasher salt

Reset: Turn off power for 2 minutes, then restart.

Service: Contact authorized Diplomat service center. Keep model number ready when calling.