Diplomat Select Gas Hob Manual

The Diplomat Select Gas Hob is a premium cooking appliance featuring multiple gas burners with variable heat control, electronic ignition, durable stainless steel construction, flame failure safety device, easy-clean surfaces, and compatibility with natural gas or LPG. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Operation 6. Cooking Guidelines 7. Cleaning & Maintenance 8. Safety Features 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Stainless steel hob surface, multiple gas burners, control knobs, electronic ignition system, flame failure device, pan supports.

Feature	Description
Burner Configuration	Multiple burners with different heat outputs
Control Knobs	Precise flame adjustment for each burner
Electronic Ignition	Push-and-turn automatic ignition
Flame Failure Device	Automatic gas shut-off if flame extinguishes
Pan Supports	Enameled cast iron for stability
Burner Caps	Removable for easy cleaning
Gas Type	Natural gas or LPG compatible
Construction	Stainless steel with easy-clean surface

Installation

Unpack and inspect contents. Ensure work surface is level and heat-resistant.

Gas Connection: Use approved gas hose and fittings; check for leaks with soap solution.
Cutout Dimensions: Follow specified cutout size for countertop installation.
Ventilation: Ensure adequate kitchen ventilation as per local regulations.
Secure Hob: Place in cutout and secure with provided brackets.
Final Check: Test all connections before first use.

WARNING! Installation must be performed by qualified gas technician. Do not attempt DIY gas connections.

First-Time Setup

After installation, prepare hob for first use.

Remove protective films: Peel off all protective coverings from surfaces.
Initial Cleaning: Wipe surfaces with damp cloth and mild detergent.
Burner Assembly: Place pan supports and burner caps in correct positions.
Test Ignition: Turn each knob to verify proper ignition and flame pattern.
Check Flame: Ensure blue flame with minimal yellow tipping.

CAUTION! Never operate hob without proper burner assembly in place.

Specifications

Material: Premium stainless steel
Burner Types: Various sizes (Rapid, Semi-rapid, Auxiliary)
Ignition: Electronic push-button ignition
Safety: Flame failure protection on all burners
Gas Consumption: Varies by burner size and gas type
Dimensions: Standard hob size with specified cutout requirements
Gas Types: Natural gas (G20/G25) or LPG
Warranty: Manufacturer's warranty as specified

Controls and Operation

Control knobs located on front panel for easy access.

Operation Steps:

Push control knob inward and turn counterclockwise to ignition position
Hold for 2-3 seconds until flame ignites
Adjust flame height by turning knob between MIN and MAX positions
Turn to OFF position to extinguish flame

Flame Settings: High (rapid boiling), Medium (simmering), Low (keeping warm)

Cooking Guidelines

Optimize cooking performance with proper techniques.

Match pan size to burner size for efficient heating
Use flat-bottomed pans for best heat transfer
Start with high flame, reduce to desired cooking level
Keep burner caps and pan supports clean for optimal performance
Use lids to reduce cooking time and energy consumption

Tip: Always supervise cooking and keep flammable materials away from hob.

Cleaning & Maintenance

Regular cleaning ensures longevity and performance.

Daily Cleaning: Wipe surfaces with damp cloth after cooling
Burner Removal: Lift off burner caps and clean with warm soapy water
Pan Supports: Wash separately, dry thoroughly before replacing
Stainless Steel: Use specialized cleaners to maintain finish
Ignition: Keep ignition area clean and dry

CAUTION! Never use abrasive cleaners or steel wool on surfaces.

Safety Features

Built-in safety mechanisms for secure operation.

Flame Failure Device: Automatic gas shut-off
Thermal Safety Cut-off: Prevents overheating
Child Safety: Knob positions with clear OFF marking
Stable Pan Supports: Prevent pan slippage
Gas Leak Protection: Quality seals and connections

Regulatory Information

CE certified and complies with European gas appliance standards. Manufactured to EN 30-1-1 standards for domestic cooking appliances. For technical support or service, contact authorized Diplomat service centers. Keep this manual for future reference.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Burner won't ignite	No gas supply/moisture	Check gas valve; dry ignition area; ensure knob pressed fully
Uneven flame	Clogged burner	Clean burner ports with soft brush; check for debris
Yellow flame	Air mixture incorrect	Adjust air shutter; ensure proper ventilation
Ignition clicks but no flame	Blocked electrode	Clean electrode area; check spark gap
Gas smell	Leakage	Turn off immediately; ventilate area; call technician

Service: Contact authorized Diplomat service provider for repairs

Emergency: In case of gas leak, evacuate area and call emergency services