Diplomat Washer Dryer Manual

The Diplomat Washer Dryer is a high-efficiency combination appliance featuring multiple wash programs, drying cycles, energy-saving modes, child lock, delay start, and digital display. With a capacity of 8kg wash and 5kg dry, it offers various temperature settings, spin speeds, and specialized programs for different fabric types. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Utilities 7. Operating Programs 8. Safety Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital control panel, LED display, detergent dispenser, drum light, water inlet valves, drain pump, heating element, and moisture sensors.

FeatureDescription
Wash Capacity8kg maximum load capacity
Dry Capacity5kg maximum drying capacity
Programs15 wash programs including Cotton, Synthetic, Delicates, Quick Wash
Drying Options6 drying programs with different temperature settings
Energy RatingA++ energy efficiency class
Spin Speeds400-1400 rpm adjustable spin speeds
Child LockPrevents accidental program changes
Delay StartUp to 24 hours delay timer
Water ProtectionAquaStop leak protection system
DisplayDigital LED with time remaining indicator

Installation

Unpack and inspect contents. Place on level floor surface.

  1. Remove transit bolts: Use spanner to remove all four transit bolts from rear.
  2. Connect water supply: Attach hoses to hot and cold water taps (red for hot, blue for cold).
  3. Connect drain hose: Route drain hose to standpipe or sink, ensure proper height.
  4. Connect to power: Plug into grounded 230V AC power outlet.
  5. Level the appliance: Adjust feet to ensure machine is perfectly level.

WARNING! Do not operate without removing transit bolts. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first use, run an empty wash cycle.

  1. Connect water and power: Ensure all utilities are properly connected.
  2. Run initial cycle: Select Cotton program at 90°C without laundry.
  3. Set preferences: Configure language, time, and default settings.
  4. Test functions: Verify all programs and features work correctly.
  5. Read manual: Familiarize yourself with all safety instructions.

CAUTION! Always close door properly before starting any cycle. Keep children away during operation.

Specifications

Controls and Settings

Access functions via rotary dial and digital buttons. Control Panel: POWER, PROGRAM SELECTOR, START/PAUSE, OPTIONS, CHILD LOCK.

Display Indicators: Time remaining, temperature, spin speed, program progress, delay start, child lock active.

Wash Programs: COTTON, SYNTHETIC, DELICATES, WOOL, QUICK WASH, SPORTS WEAR, JEANS, MIXED LOAD. Drying Options: COTTON DRY, SYNTHETIC DRY, DELICATE DRY, TIME DRY, AIR DRY. Settings: Temperature (cold-90°C), Spin Speed (400-1400 rpm), Extra Rinse, Pre-wash, Delay Start (1-24h).

Connecting Utilities

Water Supply: Hot and cold water inlets. Drain: Drain hose connection. Power: 230V grounded outlet.

  1. Turn off water and power before connecting.
  2. Connect water hoses: Red to hot water, blue to cold water.
  3. Position drain hose: Secure in standpipe or sink, maximum height 1m.
  4. Plug into power: Use dedicated circuit with proper grounding.
  5. Check for leaks: Turn on water and inspect all connections.

Tip: Use hose clips to secure water connections. Ensure drain hose is not kinked.

Operating Programs

Supports various fabric types and soil levels.

  1. Load laundry: Open door, load items evenly distributed.
  2. Add detergent: Use dispenser drawer compartments (I-pre-wash, II-main wash, softener).
  3. Select program: Turn dial to desired wash program.
  4. Adjust settings: Modify temperature, spin speed, and options as needed.
  5. Start cycle: Press START/PAUSE button.
  6. Add drying: After wash completes, select drying program if required.
  7. Unload: Remove laundry promptly after cycle completion.
  8. Clean filter: Regularly clean pump filter and detergent drawer.

WARNING! Do not overload machine. Remove all objects from pockets before washing.

Safety Features

Child Lock: Press and hold CHILD LOCK button for 3 seconds to activate/deactivate. Door Lock: Automatic door locking during operation. Overflow Protection: Automatic water level monitoring. Imbalance Control: Detects uneven loads and adjusts spin accordingly.

Care & Maintenance

Unplug before cleaning. Wipe exterior with damp cloth. Clean detergent drawer monthly. Clean pump filter every 3 months. Run cleaning cycle every 30 washes.

CAUTION! Do not use abrasive cleaners. Never spray water directly on control panel.

Regulatory Information

CE certified: Complies with European safety standards. Energy Label: A++ rating. Waste Electrical: Dispose of according to local regulations. For support, visit www.diplomat-appliances.com or contact +44 (0) 1234 567890.

Troubleshooting

SymptomPossible CauseCorrective Action
Machine won't startPower/doorCheck power connection; ensure door is properly closed.
No water intakeTaps/hosesEnsure water taps are open; check hose for kinks.
Water not drainingFilter/drainClean pump filter; check drain hose for blockages.
Excessive vibrationLeveling/loadCheck machine is level; redistribute load evenly.
Error codes displayedVarious faultsConsult error code list in manual; reset if possible.

Reset: Unplug for 5 minutes then restart.

Service: +44 (0) 1234 567890; www.diplomat-appliances.com

Diplomat Washer Dryer Manual © - All Rights Reserved 2025