Diplomat Washing Machine 8512 Manual

The Diplomat Washing Machine 8512 is a high-efficiency front-loading washing machine with 8kg capacity, multiple wash programs, energy-saving features, child lock, delay start, and digital display. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Using Wash Programs 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Front-loading drum, digital control panel, water inlet valves, drain pump, detergent dispenser, and child safety lock.

FeatureDescription
Capacity8kg load capacity
Wash ProgramsCotton, Synthetic, Delicate, Quick Wash, Wool
Spin SpeedUp to 1400 RPM
Energy RatingA+++ energy efficiency
Water ConsumptionApprox. 50 liters per cycle
Dimensions85cm H x 60cm W x 54cm D
DisplayDigital LED display with time remaining
Delay StartUp to 24 hours delay timer
Child LockPrevents accidental program changes
Door LockAutomatic safety lock during operation

Installation

Unpack and inspect contents. Place on level, stable surface.

  1. Remove transit bolts: Locate and remove all transit bolts from rear panel.
  2. Connect water supply: Attach hot and cold water hoses to corresponding inlets.
  3. Connect drain hose: Route drain hose to standpipe or sink.
  4. Level the machine: Adjust feet to ensure machine is perfectly level.
  5. Plug into electrical outlet: Use grounded 3-prong outlet.

WARNING! Do not remove transit bolts before installation. Ensure water connections are tight to prevent leaks.

First-Time Setup

After installation, perform initial setup before first use.

  1. Run empty cycle: Select Cotton program at 90°C without laundry.
  2. Set language: Press and hold Program and Temperature buttons for 3 seconds.
  3. Test functions: Run quick wash cycle to verify all functions work properly.
  4. Load detergent: Fill detergent dispenser compartments as needed.

CAUTION! Always close door securely before starting any wash cycle.

Specifications

Controls and Settings

Control panel includes: Power button, Program selector, Temperature setting, Spin speed, Start/Pause, and Delay start.

Program Selection: Rotate dial to select desired wash program. LED indicators show selected options.

Temperature Settings: Cold, 30°C, 40°C, 60°C, 90°C. Spin Speed: Rinse hold, 400, 600, 800, 1000, 1200, 1400 RPM. Options: Pre-wash, Extra rinse, Delay start, Child lock.

Connecting Water Supply

Connect to both hot and cold water supply for optimal performance.

  1. Turn off water supply valves before connecting hoses.
  2. Connect blue-marked hose to cold water supply.
  3. Connect red-marked hose to hot water supply.
  4. Ensure hose connections are tight but do not overtighten.
  5. Open water supply valves slowly and check for leaks.

Tip: Use only manufacturer-approved hoses. Replace hoses every 5 years.

Using Wash Programs

Select appropriate program based on fabric type and soil level.

  1. Load laundry: Do not exceed maximum capacity.
  2. Add detergent: Use recommended amount in dispenser.
  3. Select program: Turn dial to desired wash program.
  4. Adjust settings: Set temperature and spin speed as needed.
  5. Start cycle: Press Start/Pause button.
  6. Unload promptly: Remove laundry immediately after cycle completes.

WARNING! Do not wash items contaminated with flammable liquids. Balance load evenly.

Safety Features

Child Lock: Press and hold Start/Pause for 3 seconds to activate. Door Lock: Automatic locking during operation. Overflow Protection: Automatic water shut-off if overfill detected. Unbalanced Load Detection: Automatically redistributes load or stops cycle.

Care & Cleaning

Monthly maintenance: Run cleaning cycle at 90°C without laundry. Clean detergent dispenser: Remove and rinse under warm water. Clean door seal: Wipe rubber seal to prevent mold buildup. Clean filter: Access and clean pump filter every 3 months.

CAUTION! Unplug machine before cleaning. Do not use abrasive cleaners.

Regulatory Information

CE certified. Complies with EU directives for electrical equipment. Energy label according to EU regulation 2019/2014. Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. For support, visit www.diplomat-appliances.com or contact +44 (0) 1234 567890.

Troubleshooting

SymptomPossible CauseCorrective Action
Machine won't startPower supply/doorCheck power cord; ensure door is closed properly; press Start button.
No water intakeWater supply/tapsCheck water taps are open; ensure hoses not kinked; clean inlet filters.
Water leakageHose connectionsTighten hose connections; check drain hose position; inspect door seal.
Excessive vibrationTransit bolts/levelingEnsure transit bolts removed; check machine is level; redistribute load.
Poor washing resultsDetergent/loadingUse correct detergent amount; do not overload; select proper program.

Reset: Unplug for 5 minutes then restart.

Service: +44 (0) 1234 567890; www.diplomat-appliances.com

Diplomat Washing Machine 8512 Manual © - All Rights Reserved 2025