dir 130 manual pdf

The DIR-130 is a wireless broadband router with advanced security features, 4-port 10/100 switch, built-in firewall, and support for multiple operating modes. It provides high-speed wireless connectivity, VPN pass-through capabilities, and comprehensive network management tools. Below are key sections for setup, configuration, features, troubleshooting, and technical specifications.

Product Overview

Key components: Wireless router, power adapter, Ethernet cable, installation guide, warranty information.

Feature	Description
Wireless Standard	802.11g 54Mbps
Ethernet Ports	4 x 10/100 Mbps LAN ports
WAN Port	1 x 10/100 Mbps for internet connection
Security	WEP, WPA, WPA2, built-in firewall
VPN Support	PPTP, L2TP, IPSec pass-through
Antennas	2 x external detachable antennas
Reset Button	Factory reset function
Power	DC 5V, 2.5A power adapter
LED Indicators	Power, Internet, Wireless, LAN ports
Dimensions	142 x 110 x 31 mm

Hardware Installation

Unpack and verify all components. Choose a central location for optimal wireless coverage.

1. Connect to modem: Use Ethernet cable from modem to WAN port.
2. Connect computers: Use Ethernet cables from computers to LAN ports 1-4.
3. Connect power: Plug power adapter into router and electrical outlet.
4. Position antennas: Extend antennas vertically for best signal.

IMPORTANT! Keep router away from metal objects and other electronic devices that may cause interference.

Initial Setup

Power on router; wait for all LEDs to stabilize.

1. Connect to router: Use Ethernet cable or connect to default wireless network.
2. Access web interface: Open browser and enter http://192.168.0.1
3. Login: Use default credentials (admin/password).
4. Run setup wizard: Follow step-by-step configuration for internet connection.
5. Configure wireless: Set SSID, security type, and password.

NOTE: Change default password immediately after first login for security.

Technical Specifications

• Wireless Standards: IEEE 802.11g, 802.11b
• Data Rate: Up to 54Mbps
• Frequency Band: 2.4GHz
• Security: 64/128-bit WEP, WPA, WPA2
• Firewall: SPI (Stateful Packet Inspection)
• VPN Support: PPTP, L2TP, IPSec pass-through
• Ports: 4 x LAN 10/100, 1 x WAN 10/100
• Power Input: DC 5V, 2.5A
• Operating Temp: 0°C to 40°C
• Storage Temp: -20°C to 70°C

Web Interface Configuration

Access router settings through web browser at http://192.168.0.1

Main Sections: Setup, Wireless, Security, Access Control, Advanced, Tools.

Setup: Internet connection type (Dynamic IP, Static IP, PPPoE), time settings. Wireless: SSID, channel, security mode, MAC filtering. Security: Firewall settings, VPN pass-through. Access Control: Parental controls, website filtering. Advanced: Virtual server, DMZ, UPnP. Tools: Admin password, system log, firmware update.

Wireless Settings

Configure wireless network for optimal performance and security.

1. SSID: Set unique network name (disable SSID broadcast for added security).
2. Channel: Select least congested channel (1, 6, or 11 recommended).
3. Security: Enable WPA2-Personal with strong password.
4. MAC Filtering: Restrict access to specific devices.
5. Transmission Rate: Auto or fixed rate settings.

Tip: Use WPA2 encryption with a strong password containing letters, numbers, and symbols.

Security Features

Comprehensive security options to protect your network.

Feature	Description
Firewall	SPI with DoS protection
Wireless Security	WEP, WPA, WPA2 encryption
MAC Address Filtering	Allow/deny specific devices
VPN Pass-through	PPTP, L2TP, IPSec support
Access Control	Website filtering, parental controls
DMZ	Designate exposed host

Advanced Settings

Advanced configuration options for experienced users.

1. Virtual Server: Port forwarding for specific applications.
2. DMZ Host: Expose one computer to the internet.
3. UPnP: Enable automatic port configuration.
4. QoS: Quality of Service for bandwidth management.
5. Dynamic DNS: Support for DDNS services.
6. Static Routing: Manual route configuration.

WARNING! Advanced settings may affect network stability; configure carefully.

Maintenance & Updates

Regular maintenance ensures optimal performance.

1. Firmware Updates: Check manufacturer website regularly.
2. Backup Settings: Save configuration before changes.
3. Reboot: Restart router periodically for best performance.
4. Reset: Use reset button for 10 seconds to restore factory defaults.

CAUTION! Backup configuration before firmware updates; reset will erase all custom settings.

Regulatory Compliance

FCC Part 15: Class B digital device compliant with interference limits. CE marked for European compliance. RoHS compliant. Meets safety standards UL60950-1, CSA C22.2 No. 60950-1. For technical support, visit manufacturer website or contact customer service.

Troubleshooting Guide

Symptom	Possible Cause	Corrective Action
No internet connection	WAN cable/ISP	Check WAN cable; verify ISP status; reboot modem and router.
Wireless devices can't connect	Security settings	Verify SSID and password; check MAC filtering; reset wireless settings.
Slow wireless speed	Interference/distance	Change channel; move closer to router; reduce interference sources.
Can't access web interface	IP address/connection	Verify computer IP; use Ethernet cable; clear browser cache.
Router keeps restarting	Power/overheating	Check power adapter; ensure proper ventilation; update firmware.

Reset Procedure: Hold reset button for 10 seconds until power LED blinks.

Support: Manufacturer website, customer service hotline, online documentation.