dir-601 manual download

The D-Link DIR-601 is a Wireless N 150 Home Router that provides high-speed wireless connectivity for home networks. This router supports IEEE 802.11n standards with data rates up to 150Mbps, features four 10/100 Ethernet ports, WPA/WPA2 security protocols, easy setup wizard, and web-based configuration interface. Below are key sections covering features, installation, configuration, troubleshooting, and manual download options.

1. Features at a Glance 2. Package Contents 3. Hardware Installation 4. Specifications 5. Web Configuration 6. Wireless Setup 7. Security Settings 8. Advanced Features 9. Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Wireless N 150 Router, Power Adapter, Ethernet Cable, Quick Installation Guide, Web-based Configuration Utility.

Feature	Description
Wireless Standard	IEEE 802.11n (150Mbps)
Ethernet Ports	4 x 10/100 Mbps LAN ports
WAN Port	1 x 10/100 Mbps for internet connection
Security	WPA/WPA2, WEP, MAC Address Filtering
Antenna	Internal antenna
Setup Wizard	Web-based easy configuration
Reset Button	Factory reset function
Power LED	Indicates power status
Internet LED	Shows internet connection status
Wireless LED	Indicates wireless activity

Package Contents

Unpack and verify all components are included.

DIR-601 Wireless N 150 Router
Power Adapter (12V DC)
Ethernet Cable (CAT5e)
Quick Installation Guide
Resource CD (with manual and utilities)

WARNING! Use only the provided power adapter to avoid damage. Keep all packaging for future reference.

Hardware Installation

Connect the router following these steps.

Connect power: Plug power adapter into router and wall outlet.
Connect internet: Plug Ethernet cable from modem to WAN port.
Connect computers: Use Ethernet cables to connect devices to LAN ports.
Power on: Verify all LED indicators light up properly.

CAUTION! Ensure proper ventilation; do not block router vents. Place on stable, flat surface.

Specifications

Wireless Standards: IEEE 802.11n, 802.11g, 802.11b
Data Rates: Up to 150Mbps
Frequency Band: 2.4GHz
Ports: 4 x 10/100 LAN, 1 x 10/100 WAN
Security: WPA/WPA2, WEP, MAC Filtering, SSID Broadcast Control
Antenna: Internal antenna
Power Supply: 12V DC, 1A
Operating Temp: 0°C to 40°C
Dimensions: 117 x 142 x 31 mm

Web Configuration

Access router settings via web browser.

Connect computer to router via Ethernet or wireless
Open web browser and enter: http://192.168.0.1
Login with default credentials (admin/password)
Run Setup Wizard for initial configuration
Configure internet connection type (DHCP, PPPoE, Static IP)

Tip: Change default password for security. Write down new password for future reference.

Wireless Setup

Configure wireless network settings.

Access Wireless Settings in web interface
Set SSID (network name)
Select wireless channel (Auto recommended)
Configure security (WPA2-Personal recommended)
Set wireless password (minimum 8 characters)
Save settings and restart router if prompted

WARNING! Enable wireless security to prevent unauthorized access to your network.

Security Settings

Enhanced security features for network protection.

Feature	Description
Wireless Security	WPA/WPA2-Personal, WEP (64/128-bit)
MAC Address Filtering	Allow/deny specific devices
SSID Broadcast	Enable/disable network visibility
Firewall	SPI firewall protection
VPN Pass-through	PPTP, L2TP, IPSec

Advanced Features

Additional configuration options.

Virtual Server: Port forwarding for specific applications
Quality of Service (QoS): Bandwidth management
Parental Controls: Website filtering and access scheduling
Guest Zone: Separate wireless network for guests
Dynamic DNS: Support for DDNS services
System Log: View router activity and events

Maintenance

Router maintenance and firmware updates.

Regularly check for firmware updates
Backup configuration settings
Monitor connected devices
Restart router periodically for optimal performance

CAUTION! Do not interrupt firmware update process. Ensure stable power during updates.

Regulatory Information

FCC Part 15: Class B digital device compliant with interference limits. CE Mark: European conformity. RoHS compliant. For technical support, visit www.dlink.com or contact 1-877-453-5465. Copyright © D-Link Corporation. All rights reserved.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No internet connection	WAN cable/configuration	Check WAN cable; verify internet settings; restart modem and router.
Cannot access web interface	IP address/connection	Ensure computer is connected; check IP settings; try different browser.
Wireless devices cannot connect	Security settings/range	Verify wireless password; check signal strength; move closer to router.
Slow wireless speed	Interference/channel	Change wireless channel; reduce interference sources; update firmware.
Router keeps restarting	Power/overheating	Check power adapter; ensure proper ventilation; reduce connected devices.

Reset: Press and hold reset button for 10 seconds to restore factory defaults.

Support: 1-877-453-5465; www.dlink.com