DIR-601 Router Manual

The D-Link DIR-601 is a wireless N150 router providing reliable wireless connectivity for home and small office use. It features 150Mbps wireless speed, WPA/WPA2 security, easy setup wizard, four 10/100 Ethernet ports, WPS button for quick secure connections, and web-based configuration interface. Below are key sections for setup, features, configuration, security, and troubleshooting.

Features at a Glance

Key components: Wireless router, power adapter, Ethernet cable, installation guide.

Feature	Description
Wireless Speed	Up to 150Mbps
Wireless Security	WPA/WPA2 encryption
Ethernet Ports	4 x 10/100 LAN ports, 1 x 10/100 WAN port
WPS Button	Wi-Fi Protected Setup for easy secure connections
Antennas	2 external fixed antennas
Standards	IEEE 802.11n, 802.11g, 802.11b
Reset Button	Factory reset function
Power Port	DC 5V power input
LED Indicators	Power, Internet, Wireless, LAN ports status

Package Contents

Unpack and verify all components are present.

• DIR-601 Wireless N150 Router
• Power Adapter (5V DC)
• Ethernet Cable (CAT5e)
• Installation Guide
• Warranty Information

NOTE: Contact your retailer if any items are missing or damaged.

Hardware Installation

Follow these steps for initial hardware setup.

1. Connect power: Plug power adapter into router and wall outlet.
2. Connect to modem: Use Ethernet cable from modem to router's WAN port.
3. Connect computers: Use Ethernet cables from computers to router's LAN ports.
4. Check LEDs: Power LED should be solid; Internet LED should light when connected.

WARNING! Use only the provided power adapter. Ensure proper ventilation around router.

Specifications

• Wireless Standards: IEEE 802.11n, 802.11g, 802.11b
• Wireless Speed: Up to 150Mbps
• Frequency Band: 2.4GHz
• Antennas: 2 external fixed antennas
• Ethernet Ports: 4 x 10/100 LAN, 1 x 10/100 WAN
• Security: WEP, WPA, WPA2, WPS
• Power Supply: 5V DC, 1.0A
• Operating Temp: 0°C to 40°C
• Dimensions: 117 x 150 x 31 mm

Web Configuration

Access router settings through web browser.

1. Connect computer to router via Ethernet or Wi-Fi
2. Open web browser and enter: http://192.168.0.1
3. Login with default credentials (admin/admin)
4. Run Internet Connection Setup Wizard
5. Configure basic settings and apply changes

Tip: Change default password immediately for security.

Wireless Setup

Configure wireless network settings.

1. Access Wireless Settings in web interface
2. Set SSID (network name)
3. Select wireless channel (Auto recommended)
4. Configure security (WPA2 recommended)
5. Set wireless password
6. Apply settings and reconnect devices

WPS Setup: Press WPS button on router, then activate WPS on client device within 2 minutes.

Security Settings

Essential security configurations for network protection.

Setting	Recommendation
Admin Password	Change from default immediately
Wireless Security	Use WPA2-Personal with strong password
SSID Broadcast	Disable for additional security
MAC Filtering	Enable to restrict device access
Firewall	Keep enabled for network protection

Advanced Features

Additional configuration options available.

• Virtual Server: Port forwarding for specific applications
• QoS: Quality of Service for bandwidth management
• Parental Controls: Website filtering and access restrictions
• Guest Zone: Separate wireless network for guests
• Network Tools: Ping, traceroute, system log

Maintenance

Routine maintenance procedures.

1. Firmware Updates: Check D-Link website for latest firmware
2. Backup Settings: Save configuration before making changes
3. Reboot: Restart router periodically for optimal performance
4. Reset: Use reset button for 10 seconds to restore factory defaults

CAUTION! Firmware update interruption may damage router.

Regulatory Information

FCC Part 15: Class B digital device compliant. This device complies with Part 15 of FCC Rules. Operation subject to conditions: (1) device may not cause harmful interference, (2) device must accept any interference received. Copyright © D-Link Corporation. For support, visit www.dlink.com or contact technical support.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No internet connection	WAN cable/modem	Check WAN cable; restart modem and router; verify ISP settings.
Wireless devices can't connect	Security settings	Verify SSID and password; check wireless security settings.
Slow wireless speed	Interference/distance	Change wireless channel; move closer to router; reduce interference sources.
Can't access web interface	IP address/connection	Verify computer IP settings; use reset button; try different browser.
LED indicators not normal	Power/connections	Check power adapter; verify all cable connections; restart router.

Reset: Hold reset button for 10 seconds to restore factory defaults.

Support: www.dlink.com or technical support hotline