DIR-615 Instruction Manual

The D-Link DIR-615 is a wireless N 300 router with 4-port 10/100 switch, built-in firewall, WPA/WPA2 security, QoS features, and easy setup wizard. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Package Contents 3. Hardware Installation 4. Specifications 5. Web Configuration 6. Wireless Setup 7. Security Features 8. Port Forwarding 9. Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Wireless router with 4 LAN ports, WAN port, reset button, power connector, external antennas.

Feature	Description
Wireless Standard	802.11n up to 300Mbps
LAN Ports	4 x 10/100 Ethernet ports
WAN Port	1 x 10/100 Ethernet port for internet
Antennas	2 external detachable antennas
Security	WPA/WPA2, firewall, MAC filtering
QoS	Quality of Service for bandwidth management
Setup Wizard	Web-based configuration interface
Reset Button	Factory reset function
Power	12V DC power adapter
LED Indicators	Power, Internet, Wireless, LAN ports

Package Contents

Unpack and verify all components are present.

DIR-615 Wireless Router
Power Adapter (12V DC)
Ethernet Cable
Quick Installation Guide
CD with Manual and Utilities
Warranty Information

NOTE! Contact your dealer if any items are missing or damaged.

Hardware Installation

Follow these steps for physical setup.

Position router: Place in central location for best wireless coverage.
Connect power: Plug power adapter into router and wall outlet.
Connect internet: Plug Ethernet cable from modem to WAN port.
Connect computers: Use Ethernet cables to connect devices to LAN ports.
Install antennas: Attach both antennas securely.

WARNING! Use only the provided power adapter. Ensure proper ventilation around router.

Specifications

Wireless Standards: IEEE 802.11n, 802.11g, 802.11b
Wireless Speed: Up to 300Mbps
Frequency Band: 2.4GHz
Antennas: 2 x 5dBi detachable
LAN Ports: 4 x 10/100 Ethernet
WAN Port: 1 x 10/100 Ethernet
Security: WEP, WPA, WPA2, firewall, MAC filtering
Management: Web-based interface
Power Input: 12V DC, 1A
Operating Temp: 0°C to 40°C

Web Configuration

Access router settings through web browser.

Connect computer to router via Ethernet or wireless
Open web browser and enter: http://192.168.0.1
Login with default credentials (admin/password)
Run Internet Connection Setup Wizard
Configure basic settings (time zone, device name)
Save settings and restart router if prompted

Tip: Change default password for security after initial setup.

Wireless Setup

Configure wireless network settings.

Access Wireless Settings in web interface
Set Wireless Network Name (SSID)
Select region and channel (auto recommended)
Enable wireless security (WPA2 recommended)
Set wireless password (8-63 characters)
Save settings and reconnect wireless devices

Security Note: Use WPA2-Personal with strong password for best security.

Security Features

Advanced security options available.

Firewall: SPI firewall protection
MAC Filtering: Allow/block specific devices
Port Forwarding: For gaming and applications
URL Filtering: Block specific websites
VPN Pass-through: PPTP, L2TP, IPSec
DMZ: Designate exposed host

Access these features in Advanced settings menu.

Port Forwarding

Set up port forwarding for applications and games.

Access Advanced > Port Forwarding
Enable port forwarding
Enter application name
Specify IP address of target device
Set TCP/UDP ports or port range
Save settings and test connection

Note: Ensure target device has static IP address.

Maintenance

Router maintenance and firmware updates.

Firmware Updates: Check Tools > Firmware
Backup Settings: Tools > System > Save Configuration
Factory Reset: Hold reset button for 10 seconds
Reboot: Tools > System > Reboot Device

CAUTION! Backup settings before firmware update. Do not power off during update.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. This device complies with Part 15 of FCC Rules. Operation subject to conditions: (1) device may not cause harmful interference, (2) device must accept any interference received. For support, visit www.dlink.com or contact 1-877-453-5465.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No internet connection	WAN cable/ISP	Check WAN cable; verify ISP service; reboot modem and router.
Wireless not working	Wireless enabled/security	Enable wireless in settings; check security settings; reboot router.
Can't access web interface	IP address/connection	Verify computer IP; use correct URL (192.168.0.1); try different browser.
Slow wireless speed	Interference/distance	Change wireless channel; move closer to router; check for interference.
Forgot password	Reset required	Perform factory reset using reset button (loses all settings).

Reset: Hold reset button for 10 seconds to restore factory defaults.

Support: 1-877-453-5465; www.dlink.com