DIR-615 Manual Setup

The D-Link DIR-615 is a wireless N router with 4-port 10/100 switch, wireless security support, and easy setup wizard. This manual covers initial configuration, wireless setup, security features, network management, and troubleshooting for optimal performance.

Package Contents

Standard components included: DIR-615 Wireless Router, Power Adapter, Ethernet Cable, Quick Install Guide, CD with Manual and Setup Wizard.

Item	Description
DIR-615 Router	Main wireless router unit
Power Adapter	12V DC power supply
Ethernet Cable	CAT5e cable for initial setup
Quick Install Guide	Basic setup instructions
Setup CD	Contains manual and setup wizard

Hardware Overview

Front panel indicators and rear port connections.

Component	Function
Power LED	Indicates power status
Internet LED	WAN connection status
Wireless LED	Wireless network activity
LAN LEDs (1-4)	Ethernet port connections
WAN Port	Internet connection
LAN Ports (1-4)	Ethernet device connections
Reset Button	Factory reset (hold 10+ seconds)
Power Connector	12V DC power input

Initial Setup

Basic physical setup and connection steps.

1. Connect power adapter to router and outlet
2. Connect modem to WAN port using Ethernet cable
3. Connect computer to LAN port 1-4
4. Power on router and wait for LEDs to stabilize
5. Open web browser and navigate to http://dlinkrouter.local or 192.168.0.1

NOTE: Ensure all connections are secure before powering on devices.

Web Configuration

Accessing and navigating the router's web interface.

1. Open web browser and enter 192.168.0.1 in address bar
2. Default username: admin (leave password blank)
3. Run Internet Connection Setup Wizard
4. Select connection type (DHCP, PPPoE, Static IP)
5. Configure basic network settings
6. Save settings and reboot router

SECURITY: Change default password after initial setup.

Wireless Setup

Configuring wireless network settings.

1. Navigate to Wireless Settings in web interface
2. Set Wireless Network Name (SSID)
3. Select wireless mode (802.11b/g/n mixed)
4. Configure wireless channel (Auto recommended)
5. Enable wireless security (WPA/WPA2 recommended)
6. Set wireless password (8-63 characters)
7. Save settings and apply changes

TIP: Use unique SSID and strong password for security.

Security Configuration

Essential security settings for network protection.

Setting	Recommendation
Admin Password	Change from default
Wireless Security	WPA2-Personal
Encryption	AES
SSID Broadcast	Disable for added security
MAC Filtering	Enable for device control
Firewall	SPI Firewall enabled

Port Forwarding

Setting up port forwarding for applications and games.

1. Navigate to Advanced > Port Forwarding
2. Enable port forwarding
3. Add custom service or select from predefined list
4. Enter internal IP address of target device
5. Specify port range and protocol (TCP/UDP/Both)
6. Save settings and apply changes

NOTE: Ensure target device has static IP address.

Advanced Settings

Additional configuration options for advanced users.

• QoS: Quality of Service for bandwidth management
• VPN: PPTP and IPSec pass-through support
• Dynamic DNS: Support for DDNS services
• Static Routing: Manual route configuration
• Access Control: URL and domain filtering
• Wireless Schedule: Time-based wireless control

Firmware Update

Updating router firmware for latest features and security.

1. Download latest firmware from D-Link support site
2. Navigate to Tools > Firmware in web interface
3. Click Browse and select downloaded firmware file
4. Click Upload and wait for process to complete
5. Do not power off router during update
6. Router will reboot automatically when complete

WARNING: Incorrect firmware may damage router.

Factory Reset

Restoring router to default settings.

1. Locate reset button on rear panel
2. Power on router
3. Press and hold reset button for 10+ seconds
4. Release when power LED blinks
5. Wait for router to reboot (2-3 minutes)
6. Reconfigure router using initial setup steps

CAUTION: All custom settings will be lost.

Troubleshooting

Common issues and solutions for DIR-615 setup.

Problem	Possible Cause	Solution
Cannot access web interface	IP configuration	Set computer to obtain IP automatically; check cable connections
No internet connection	WAN settings	Verify WAN cable; check ISP settings; reboot modem and router
Wireless devices cannot connect	Security settings	Verify password; check wireless mode; reset wireless settings
Slow wireless speed	Interference/distance	Change wireless channel; reduce distance; check for interference
Router keeps restarting	Power/firmware	Check power supply; update firmware; factory reset if needed

Support: Visit www.dlink.com or contact 1-800-354-6527