DIR-615 Wireless N300 Router Manual

The D-Link DIR-615 is a Wireless N300 Router featuring 802.11n technology with speeds up to 300Mbps, four 10/100 Ethernet ports, WPA/WPA2 security, built-in firewall, QoS support, and easy setup wizard. Below are key sections for installation, configuration, security, troubleshooting, and specifications.

1. Features at a Glance 2. Package Contents 3. Hardware Installation 4. Web-based Configuration 5. Wireless Setup 6. Security Features 7. Advanced Settings 8. Specifications 9. LED Indicators 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Wireless router, power adapter, Ethernet cable, installation guide.

Feature	Description
Wireless Standard	IEEE 802.11n (up to 300Mbps)
Ethernet Ports	4 x 10/100 LAN ports, 1 x 10/100 WAN port
Security	WPA/WPA2, WEP, firewall, MAC filtering
Antennas	2 external antennas for improved coverage
QoS	Quality of Service for prioritizing traffic
Setup Wizard	Web-based configuration for easy setup
WPS Button	Wi-Fi Protected Setup for easy connection
Reset Button	Factory reset to default settings
Power Port	DC 12V input
Wall Mountable	Designed for wall mounting

Package Contents

Unpack and verify all components are present.

DIR-615 Wireless N300 Router
Power Adapter (12V DC)
Ethernet Cable (CAT5e)
Quick Installation Guide
Resource CD (with manual and software)

WARNING! Save packaging for future reference and potential returns.

Hardware Installation

Connect router to modem and power source.

Connect modem to WAN port using Ethernet cable.
Connect computers to LAN ports (1-4) using Ethernet cables.
Connect power adapter to router and wall outlet.
Power on router; wait for Power LED to stabilize.

CAUTION! Use included power adapter only; improper voltage may damage device.

Web-based Configuration

Access router settings via web browser.

Connect computer to router via Ethernet or Wi-Fi.
Open web browser; enter http://192.168.0.1
Login with default credentials (admin/password).
Run Internet Connection Setup Wizard.
Configure basic settings (time zone, SSID, password).

Tip: Change default password for security.

Wireless Setup

SSID: Set unique network name.
Security: Enable WPA2-Personal with strong password.
Channel: Auto-select or choose least congested channel.
Mode: 802.11n mixed mode for compatibility.
Bandwidth: 20/40 MHz for optimal performance.
WPS: Use WPS button for easy device connection.

Security Features

Protect your network from unauthorized access.

Firewall: SPI firewall enabled by default. Wireless Security: WPA/WPA2 encryption. MAC Filtering: Allow/block specific devices. Guest Network: Isolated access for visitors. Parental Controls: Block websites and set time limits.

Advanced Settings

Access advanced features for custom configuration.

Port Forwarding: For gaming and applications.
QoS: Prioritize traffic for better performance.
Dynamic DNS: For remote access.
VPN Passthrough: Support for VPN connections.
Firmware Upgrade: Keep router updated.

Tip: Backup configuration before making changes.

Specifications

Wireless Standards: IEEE 802.11n, 802.11g, 802.11b
Frequency Band: 2.4GHz
Data Rates: Up to 300Mbps
Antennas: 2 x 5dBi external antennas
Ports: 4 x LAN (10/100), 1 x WAN (10/100)
Security: WEP, WPA, WPA2, firewall
Power: 12V DC, 1A
Dimensions: 6.3" x 1.3" x 7.7"
Operating Temp: 0°C to 40°C

LED Indicators

Monitor router status through LED lights.

LED	Status	Description
Power	Solid Green	Router powered on
Internet	Solid Green	WAN connection active
Wireless	Blinking	Wireless activity
LAN (1-4)	Solid/Blinking	Ethernet connection/activity
WPS	Blinking	WPS mode active

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © D-Link Corporation; all rights reserved. For support, visit www.dlink.com or contact 1-877-453-5465.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No internet access	WAN connection	Check modem connection; restart router and modem.
Wireless not working	Settings/distance	Verify wireless enabled; move closer to router.
Can't access web interface	IP address/connection	Ensure connected to router; use correct IP address.
Slow wireless speed	Interference/distance	Change channel; reduce distance; check for interference.
Forgot password	Reset required	Press reset button for 10 seconds to factory reset.

Reset: Hold reset button for 10 seconds with power on.

Support: 1-877-453-5465; www.dlink.com