dir-619l-es manual

The D-Link DIR-619L-ES is a wireless N300 cloud router with advanced features including wireless security, guest zone access, parental controls, QoS bandwidth management, IPv6 support, and easy setup wizard. Below are key sections for setup, features, configuration, troubleshooting, and specifications.

1. Features at a Glance 2. Hardware Installation 3. Initial Setup 4. Technical Specifications 5. Web Configuration 6. Wireless Settings 7. Security Features 8. Advanced Settings 9. Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Wireless N300 router, Ethernet ports, WPS button, Reset button, Power connector, External antennas.

Feature	Description
Wireless Standard	IEEE 802.11b/g/n up to 300Mbps
Ethernet Ports	4 x 10/100M LAN ports, 1 x 10/100M WAN port
WPS Button	One-touch wireless security setup
Reset Button	Factory reset functionality
Power Connector	DC power input
External Antennas	2 x 5dBi detachable antennas
Cloud Features	Remote management via mydlink
Guest Zone	Separate wireless network for guests
Parental Controls	Website filtering and access scheduling
QoS	Bandwidth management and traffic control

Hardware Installation

Unpack and inspect contents. Place router in central location.

Connect to modem: Use Ethernet cable from modem to WAN port.
Connect computers: Use Ethernet cables to LAN ports 1-4.
Attach antennas: Screw antennas clockwise until secure.
Plug into power outlet using provided adapter.

WARNING! Use only provided power adapter. Ensure proper ventilation around router.

Initial Setup

Power on router; wait for power LED to stabilize.

Connect computer: Use Ethernet cable or wireless connection.
Access web interface: Open browser, enter http://dlinkrouter.local or 192.168.0.1
Run setup wizard: Follow on-screen instructions for basic configuration.
Set wireless: Configure SSID and security settings.

CAUTION! Keep router away from heat sources and water.

Technical Specifications

Wireless Standards: IEEE 802.11b/g/n
Wireless Speed: Up to 300Mbps
Frequency Band: 2.4GHz
Antennas: 2 x 5dBi detachable
Ports: 4 x LAN 10/100M, 1 x WAN 10/100M
Security: WPA/WPA2, WPS, Firewall, Guest Zone
Management: Web-based interface, mydlink cloud
Power Input: 12V DC, 1A
Operating Temp: 0°C to 40°C

Web Configuration

Access router settings via web browser at 192.168.0.1

Main Sections: Setup, Wireless, Security, Advanced, Tools

Setup: Internet connection (DHCP, PPPoE, Static IP), Time settings. Wireless: SSID, channel, security mode, WPS. Security: Firewall, MAC filtering, URL filtering. Advanced: QoS, Port forwarding, IPv6. Tools: Admin password, System log, Firmware update, Factory reset.

Wireless Settings

Configure wireless network for optimal performance.

Access Wireless Settings in web interface.
Set SSID (network name) and broadcast setting.
Select security: WPA2-Personal recommended.
Choose channel: Auto or manual selection.
Enable WPS for easy device connection.

Tip: Use different SSID for 2.4GHz band if dual-band capable.

Security Features

Multiple security options to protect your network.

Wireless Security: WEP, WPA, WPA2 encryption
Firewall: SPI firewall with DoS protection
MAC Filtering: Allow/deny specific devices
Guest Zone: Isolated network for visitors
Parental Controls: Website blocking and scheduling

WARNING! Always use strong passwords and WPA2 security.

Advanced Settings

Advanced configuration for experienced users.

QoS: Bandwidth management by application or device. Port Forwarding: Set up for gaming or servers. IPv6: Support for next-generation internet. VPN: Pass-through support. Dynamic DNS: Remote access configuration. Network Settings: LAN IP address, DHCP server.

Maintenance

Regular maintenance ensures optimal performance.

Firmware Updates: Check regularly for updates. Backup Settings: Save configuration file. Reset: Use reset button for 10 seconds to restore factory defaults. Cleaning: Use dry cloth; no liquids.

CAUTION! Backup settings before firmware updates.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. CE marking for European compliance. RoHS compliant. Copyright © D-Link Corporation. For support, visit www.dlink.com or contact local D-Link support center.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No internet connection	WAN cable/modem	Check WAN cable; restart modem and router; verify ISP settings.
Wireless devices can't connect	Security settings/distance	Verify password; check wireless mode; move closer to router.
Slow wireless speed	Interference/channel	Change wireless channel; reduce interference sources; check for firmware updates.
Can't access web interface	IP address/connection	Verify computer IP settings; use reset button; try different browser.
Router keeps restarting	Power/overheating	Check power adapter; ensure proper ventilation; update firmware.

Reset: Hold reset button for 10 seconds with power on.

Support: www.dlink.com or local D-Link support center