DIR 655 Manual Reset

The DIR 655 is a wireless router that may require manual resetting to restore factory default settings, resolve connectivity issues, or clear custom configurations. This manual covers the reset procedures, precautions, and post-reset setup requirements for proper operation.

1. Reset Methods Overview 2. Soft Reset Procedure 3. Hard Reset Procedure 4. Factory Default Settings 5. Post-Reset Configuration 6. Reset Precautions 7. Troubleshooting Reset Issues 8. LED Indicators After Reset 9. Safety Information 10. Technical Support

Reset Methods Overview

Two primary reset methods available: Soft Reset (restarts router) and Hard Reset (restores factory defaults).

Reset TypePurposeEffect
Soft ResetTemporary issue resolutionRestarts router without losing settings
Hard ResetMajor configuration issuesRestores all factory default settings
Web Interface ResetControlled resetFactory reset via admin interface

Soft Reset Procedure

Use soft reset for minor connectivity issues without losing configurations.

  1. Locate power cord at rear of router.
  2. Disconnect power cord from router.
  3. Wait 30 seconds for complete power drainage.
  4. Reconnect power cord firmly.
  5. Wait 2-3 minutes for full reboot and LED stabilization.

NOTE: Soft reset preserves all custom settings and configurations.

Hard Reset Procedure

Hard reset restores factory defaults and erases all custom settings.

  1. Locate reset button on rear panel (small pinhole).
  2. Use paperclip or similar tool to press and hold reset button.
  3. Continue holding reset button for 10-15 seconds.
  4. Release button when power LED begins blinking.
  5. Wait 3-5 minutes for complete reset and reboot.

WARNING! Hard reset erases all custom settings, passwords, and configurations.

Factory Default Settings

After hard reset, router returns to these factory default settings:

Post-Reset Configuration

Essential configuration steps after hard reset:

  1. Connect computer to router via Ethernet cable.
  2. Open web browser and navigate to 192.168.0.1
  3. Login with default credentials (admin/admin).
  4. Run Internet Connection Setup Wizard.
  5. Configure wireless settings (SSID and security).
  6. Change admin password for security.
  7. Save settings and restart router.

IMPORTANT: Always change default password after reset.

Reset Precautions

Important considerations before performing reset:

PrecautionReason
Backup settingsPreserve custom configurations
Document configurationsEasier post-reset setup
Check connectionsEnsure reset is necessary
Use stable powerPrevent corruption during reset
Allow complete rebootEnsure proper initialization

Troubleshooting Reset Issues

Common reset problems and solutions:

IssuePossible CauseSolution
Reset button not workingInsufficient hold timeHold for full 15 seconds
Router not respondingPower issuesCheck power supply and connections
Can't access web interfaceIP address conflictSet computer to obtain IP automatically
Settings not restoringReset incompleteRepeat hard reset procedure
LEDs not stabilizingHardware failureContact technical support

LED Indicators After Reset

Understanding LED behavior post-reset:

NOTE: Allow 5 minutes for all LEDs to stabilize after reset.

Safety Information

Important safety precautions for reset procedures:

  1. Always use proper tools for reset button (paperclip, not metal objects).
  2. Ensure router is in well-ventilated area during reset.
  3. Do not attempt reset during electrical storms.
  4. Keep router away from liquids and moisture.
  5. Use only original power adapter.

CAUTION! Never force reset button; use gentle pressure only.

Technical Support

For additional assistance with DIR 655 reset procedures:

Include router model number and firmware version when contacting support.

DIR 655 Manual Reset Guide © - All Rights Reserved 2025