The DIR-855L is a high-performance wireless router featuring dual-band technology, Gigabit Ethernet ports, advanced security features, Quality of Service (QoS) management, and easy setup wizard. Below are key sections covering features, installation, configuration, security settings, troubleshooting, and specifications.
Key components: Dual-band wireless router, Ethernet ports, Power adapter, Setup CD, Quick Installation Guide.
| Feature | Description |
|---|---|
| Wireless Standards | 802.11a/b/g/n dual-band support |
| Ethernet Ports | 4 Gigabit LAN ports, 1 Gigabit WAN port |
| USB Port | For network storage and printer sharing |
| Security | WPA/WPA2 encryption, SPI firewall |
| QoS | Traffic prioritization for better performance |
| Setup Wizard | Easy web-based configuration |
| Reset Button | Factory reset functionality |
| Power Button | Turns router on/off |
| WPS Button | Wi-Fi Protected Setup for easy connection |
| LED Indicators | Power, Internet, Wireless, Ethernet status |
Unpack and inspect contents. Place router in central location for optimal coverage.
WARNING! Keep router away from heat sources and moisture. Ensure proper ventilation.
Access router configuration via web browser.
CAUTION! Change default password immediately for security.
Access web interface via browser. Front Panel: Power, WPS, Reset buttons, LED indicators.
Web Interface: Basic Setup, Wireless Settings, Advanced, Tools, Status.
Basic Setup: Internet connection type (DHCP, PPPoE, Static). Wireless: SSID, security (WPA2 recommended), channel selection. Advanced: Port forwarding, QoS, firewall settings. Tools: Admin password, system backup, firmware update. Status: Connection status, device information.
Wired: Ethernet cables to LAN ports. Wireless: Connect to SSID with security key.
Tip: Use 5GHz band for less interference and better performance.
Quality of Service (QoS): Prioritize traffic for gaming, streaming, VoIP.
WARNING! Save configuration changes before exiting interface.
Wireless Security: Use WPA2-Personal with strong password. Firewall: Enable SPI firewall protection. Admin Access: Change default login credentials.
Regular firmware updates: Check for updates in Tools section. Reboot periodically for optimal performance.
CAUTION! Do not interrupt firmware update process.
FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © 2025 D-Link Corporation; all rights reserved. For support, visit www.dlink.com or contact 1-800-326-1688.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| No internet connection | Modem/WAN connection | Check WAN cable; reboot modem and router; verify ISP settings. |
| Wireless devices cannot connect | Security settings/range | Verify security key; check wireless mode; move closer to router. |
| Slow wireless speed | Interference/channel | Change wireless channel; use 5GHz band; reduce interference sources. |
| Router not responding | Power/overheating | Check power connection; allow to cool; perform factory reset. |
| USB device not recognized | Format/compatibility | Use FAT32 format; check device compatibility; restart router. |
Reset: Hold reset button for 10 seconds to restore factory defaults.
Service: 1-800-326-1688; www.dlink.com